Criteria

Display:

Results

Viewing 1 to 30 of 149
2017-09-23
Technical Paper
2017-01-1991
Adit Joshi
The automotive industry is heading towards the path of autonomy with the development of autonomous vehicles. An autonomous vehicle consists of two main components. The first is the software which is responsible for the decision-making capabilities of the system. The second is the hardware which encompasses all aspects of the physical vehicle which are responsible for vehicle motion such as the engine, brakes and steering subsystems along with their corresponding controls. This component forms the basis of the autonomous vehicle platform. For SAE Level 4 autonomous vehicles, where an automated driving system is responsible for all the dynamics driving tasks including the fallback driving performance in case of system faults, redundant mechanical systems and controls are required as part of the autonomous vehicle platform since the driver is completely out of the loop with respect to driving.
2017-09-19
Technical Paper
2017-01-2110
Ashutosh Kumar Jha, Prakash Choudhary
Abstract The complexity of software development is increasing unprecedentedly with every next generation of aircraft systems. This requires to adopt new techniques of software design and verification that could optimize the time and cost of software development. At the same time these techniques need to ensure high quality of software design and safety compliance to regulatory guidelines like DO-178C [1] and its supplements DO-330[2] and DO-331[3]. To arrive at new technologies one has to evaluate the alternate methods available for software design by developing models, integration of models, auto-code generation, auto test generation and also the performance parameters like time, effort, reuse and presentation needs to be evaluated. We have made an attempt to present summary of alternate design concept study, and edge of MBD over other design techniques.
2017-09-19
Journal Article
2017-01-2114
Jann-Eve Stavesand, Sören Reglitz, Andreas Himmler
Abstract In the aerospace industry, methods for virtual testing cover an increasing range of test executions carried out during the development and test process of avionics systems. Over the last years, most companies have focused on questions regarding the evaluation and implementation of methods for virtual testing. However, it has become more and more important to seamlessly integrate virtual testing into the overall development process. For instance, a company’s test strategy might stipulate a combination of different methods, such as SIL and HIL simulation, in order to benefit from the advantages of both in the same test process. In this case, efforts concentrate on the optimization of the overall process, from test specification to test execution, as well as the test result evaluation and its alignment with methods for virtual testing.
2017-09-19
Technical Paper
2017-01-2085
Sergey Lupuleac, Nadezhda Zaitseva, Margarita Petukhova, Julia Shinder, Sergey Berezin, Valeriia Khashba, Elodie Bonhomme
Abstract The paper is devoted to the simulation of A320 wing assembly on the base of numerical experiments carried out with the help of ASRP software. The main goal is to find fasteners’ configuration with minimal number of fastening elements that provides closing of admissible initial gaps. However, for considered junction type initial gap field is not known a priori though it should be provided as input data for computations. In order to resolve this problem the methodology of random initial gap generation based on available results of gap measurements is developed along with algorithms for optimization of fasteners' configuration on generated initial gaps. Presented paper illustrates how this methodology allows optimizing assembly process for A320 wing.
2017-09-19
Technical Paper
2017-01-2115
Gilberto Burgio, Leonardo Mangeruca, Alberto Ferrari, Marco Carloni, Virgilio Valdivia-Guerrero, Laura Albiol-Tendillo, Parithi Govindaraju, Marcel Gottschall, Olaf Oelsner, Sören Reglitz, Jann-Eve Stavesand, Andreas Himmler, Lionel Yapi
Abstract Multi-physics interactions between structural, electrical, thermal, or hydraulic components and the high level of system integration, characteristic of new aircraft designs, is increasing the complexity of both design and verification processes. Therefore the availability of tools, supporting integrated modelling, simulation, optimization and testing across all stages of aircraft design remains a critical challenge. This paper presents some results of the project MISSION (Modelling and Simulation Tools for Systems Integration on Aircraft). It is a collaborative task being developed under the European Union Clean Sky 2 Program, which is a public-private partnership bringing together aeronautics industrial leaders and public research organizations based in Europe. The first levels of integration of different models and tools proposed in the MISSION framework will be presented, along with simulation results.
2017-06-29
Journal Article
2017-01-9000
Teresa Donateo, Antonio Ficarella
Abstract The design of a hybrid electric powertrain requires a complex optimization procedure because its performance will strongly depend on both the size of the components and the energy management strategy. The problem is particular critical in the aircraft field because of the strong constraints to be fulfilled (in particular in terms of weight and volume). The problem was addressed in the present investigation by linking an in-house simulation code for hybrid electric aircraft with a commercial many-objective optimization software. The design variables include the size of engine and electric motor, the specification of the battery (typology, nominal capacity, bus voltage), the cooling method of the motor and the battery management strategy. Several key performance indexes were suggested by the industrial partner. The four most important indexes were used as fitness functions: electric endurance, fuel consumption, take-off distance and powertrain volume.
2017-03-28
Technical Paper
2017-01-1695
Kuang-I Shu
Abstract Much like how mobile phones ceased to be only person-to-person communications devices and became technical platforms, in-vehicle electronic devices will too cease to be solely information devices and become technical platforms incorporating all-encompassing features, including but not limited to ADAS, navigation, communication, and entertainment. This fundamental shift however will require a transformation and redesign of the vehicle’s technical architecture. Today, a vehicle’s ADAS, communications, and entertainment features exist isolated in separate devices and systems and are purpose built, leading to duplicative functions, increased costs, and difficult control, management, maintenance, and upgrade of the system. This presentation will illustrate a central control system architecture built around an IoV Gateway, an open hardware platform that integrates ICT devices for future vehicles.
2017-03-28
Technical Paper
2017-01-1676
Hartmut Lackner
Abstract Software systems, and automotive software in particular, are becoming increasingly configurable to fulfill customer needs. New methods such as product line engineering facilitate the development and enhance the efficiency of such systems. In modern, versatile systems, the number of theoretically possible variants easily exceeds the number of actually built products. This produces two challenges for quality assurance and especially testing. First, the costs of conventional test methods increase substantially with every tested variant. And secondly, it is no longer feasible to build every possible variant for the purpose of testing. Hence, efficient criteria for selecting variants for testing are necessary. In this contribution, we propose a new test design method that enables systematic sampling of variants from test cases. We present six optimization criteria to enable control of test effort and test quality by sampling variants with different characteristics.
2017-03-28
Technical Paper
2017-01-1683
Adit Joshi
Software for autonomous vehicles is highly complex and requires vast amount of vehicle testing to achieve a certain level of confidence in safety, quality and reliability. According to the RAND Corporation, a 100 vehicle fleet running 24 hours a day 365 days a year at a speed of 40 km/hr, would require 17 billion driven kilometers of testing and take 518 years to fully validate the software with 95% confidence such that its failure rate would be 20% better than the current human driver fatality rate [1]. In order to reduce cost and time to accelerate autonomous software development, Hardware-in-the-Loop (HIL) simulation is used to supplement vehicle testing. For autonomous vehicles, path following controls are an integral part for achieving lateral control. Combining the aforementioned concepts, this paper focuses on a real-time implementation of a path-following lateral controller, developed by Freund and Mayr [2].
2017-03-28
Technical Paper
2017-01-1622
Ronald Brombach, Anup Gadkari
Abstract The Body Control Module (BCM) is a very large integration site for vehicle features and functions (e.g., Locking, Alarms, interior lighting, exterior lighting, etc…). Every few years the demand to add more feature/functions and integrate more vehicle content increases. The expectation of the 2013 MY (model year) BCM, was to double the feature content and use it globally. The growth in 3 years of feature/function content was huge number that grew from 150 to over 300. This posed a major challenge to the software development team based on the methods and process that were deployed at the time. This paper cites the cultural and technology changes that were overcome when Ford Motor Company partnered with Tata Consultancy Services to help manage and define this new software engineering development methodology. The process of getting from a vague description of a new body module feature to a saleable product, presents several very challenging problems.
2017-03-28
Journal Article
2017-01-1649
Jeffrey Yeung, Omar Makke, Perry MacNeille, Oleg Gusikhin
Abstract SmartDeviceLink (SDL) is open-source software that connects the vehicle’s infotainment system to mobile applications. SDL includes an open-source software development kit (SDK) that enables a smart-device to connect to the vehicle’s human-machine interface (HMI), read vehicle data, and control vehicle sub-systems such as the audio and climate systems. It is extensible, so other convenience subsystems or brought-in aftermarket modules can be added. Consequently, it provides a platform for cyber-physical systems that can integrate wearables, consumer sensors and cloud data into an intelligent vehicle control system. As an Open Innovation Platform, new features can be rapidly developed and deployed to the market, bypassing the longer vehicle development cycles. This facilitates a channel for rapid prototyping and innovation that is not constrained by the traditional process of automotive parts development, but is rather on the timeline of software development.
2017-03-28
Technical Paper
2017-01-0116
Ankit Goila, Ambarish Desai, Feng Dang, Jian Dong, Rahul Shetty, Rakesh Babu Kailasa, Mahdi Heydari, Yang Wang, Yue Sun, Manikanta Jonnalagadda, Mohammed Alhasan, Hanlong Yang, Katherine R. Lastoskie
ADAS features development involves multidisciplinary technical fields, as well as extensive variety of different sensors and actuators, therefore the early design process requires much more resources and time to collaborate and implement. This paper will demonstrate an alternative way of developing prototype ADAS concept features by using remote control car with low cost hobby type of controllers, such as Arduino Due and Raspberry Pi. Camera and a one-beam type Lidar are implemented together with Raspberry Pi. OpenCV free open source software is also used for developing lane detection and object recognition. In this paper, we demonstrate that low cost frame work can be used for the high level concept algorithm architecture, development, and potential operation, as well as high level base testing of various features and functionalities. The developed RC vehicle can be used as a prototype of the early design phase as well as a functional safety testing bench.
2017-03-28
Technical Paper
2017-01-0066
Shogo Nakao, Akihiko Hyodo, Masaki Itabashi, Tomio Sakashita, Shingo Obara, Tetsuya Uno, Yasuo Sugure, Yoshinobu Fukano, Mitsuo Sasaki, Yoshihiro Miyazaki
This paper presents the “Virtual Failure Mode and Effects Analysis (vFMEA)” system, which is a high-fidelity electrical-failure-simulation platform, and applies it to the software verification of an electric power steering (EPS) system. The vFMEA system enables engineers to dynamically inject a drift fault into a circuit model of the electronic control unit (ECU) of an EPS system, to analyze system-level failure effects, and to verify software-implemented safety mechanisms, which consequently reduces both cost and time of development. The vFMEA system can verify test cases that cannot be verified using an actual ECU and can improve test coverage as well. It consists of a cycle-accurate microcontroller model with mass-production software implemented in binary format, analog and digital circuit models, mechanical models, and a state-triggered fault-injection mechanism.
2017-03-28
Technical Paper
2017-01-1659
Mert D. Pesé, Karsten Schmidt, Harald Zweck
Abstract The automotive industry experiences a major change as vehicles are gradually becoming a part of the Internet. Security concepts based on the closed-world assumption cannot be deployed anymore due to a constantly changing adversary model. Automotive Ethernet as future in-vehicle network and a new E/E Architecture have different security requirements than Ethernet known from traditional IT and legacy systems. In order to achieve a high level of security, a new multi-layer approach in the vehicle which responds to special automotive requirements has to be introduced. One essential layer of this holistic security concept is to restrict non-authorized access by the deployment of embedded firewalls. This paper addresses the introduction of automotive firewalls into the next-generation domain architecture with a focus on partitioning of its features in hardware and software.
2017-03-28
Technical Paper
2017-01-1671
Johannes Bach, Marc Holzäpfel, Stefan Otten, Eric Sax
Abstract Enhanced technological capabilities render the application of various, increasingly complex, functional concepts for automated driving possible. In the process, the significance of automotive software for a satisfactory driving experience is growing. To benefit from these new opportunities, thorough assessment in early development stages is highly important. It enables manufacturers to focus resources on the most promising concepts. For early assessment, a common approach is to set up vehicles with additional prototyping hardware and perform real world testing. While this approach is essential to assess the look-and-feel of newly developed concepts, its drawbacks are reduced reproducibility and high expenses to achieve a sufficient and balanced sample. To overcome these drawbacks, new flexible, realistic and preferably automated virtual test methods to complement real world verification and validation are especially required during early development phases.
2017-03-14
Journal Article
2017-01-9750
Shawn Harrington, Joseph Teitelman, Erica Rummel, Brendan Morse, Peter Chen, Donald Eisentraut, Daniel McDonough
Abstract With the prevalence of satellite imagery in the analysis of collision events growing in the field of accident reconstruction, this research aims to quantify, refine, and compare the accuracies of measurements obtained utilizing conventional instruments to the measurements obtained using Google Earth Pro software. Researchers documented and obtained 1305 unique measurements from 68 locations in 25 states and provinces in the United States, Canada, and Australia using measuring wheels and tape measures. Measurements of relevant features at each location (crosswalks, curved roadways, off-road features, etc.) were documented and subdivided into three groups: On-Road, Off-Road, and Curved Path measurements. These measurements were compared to the measurements obtained of the same features from current and historical satellite imagery within Google Earth Pro.
2016-11-08
Technical Paper
2016-32-0084
Shinichi Okunishi, Ken Ogawa
Abstract The accurate measurement of air volume is one of the critical issues in an LPL-EGR system, which has a large intake volume from the EGR valve to the combustion chamber compared to an HPL-EGR system. This includes the difficulty of measuring the flow rate of the LPL-EGR accurately. In this study, we investigated the EGR rate estimation logic with the cylinder pressure for an LPL-EGR system. This methodology is characterized by an EGR rate estimation, which uses the polytrophic change during the compression stroke, depending on the mixture and EGR rate. The polytrophic index is mainly changed by the EGR rate and the airflow rate. The EGR rate is estimated by the difference between measured pressure with sensors, and referenced pressure, which is calculated by measured parameters before compression with the assumption that the EGR rate is zero. To calculate the exact EGR rate, the influence of the air fuel ratio on the cylinder pressure was also taken into account.
2016-11-08
Journal Article
2016-32-0067
Akira Miyamoto, Kenji Inaba, Yukie Ishizawa, Manami Sato, Rei Komuro, Masashi Sato, Ryo Sato, Patrick Bonnaud, Ryuji Miura, Ai Suzuki, Naoto Miyamoto, Nozomu Hatakeyama, Masanori Hariyama
Abstract On the basis of extensive experimental works about heterogeneous catalysts, we developed various software for the design of automotive catalysts such as Ultra-Accelerated Quantum Chemical Molecular Dynamics (UA-QCMD), which is 10 million times faster than the conventional first principles molecular dynamics, mesoscopic modeling software for supported catalysts (POCO2), and mesoscopic sintering simulator (SINTA) to calculate sintering behavior of both precious metals (e.g., Pt, Pd, Rh) and supports (e.g., Al2O3, ZrO2, CeO2, or CeO2-ZrO2). We integrated the previous programs in a multiscale, multiphysics approach for the design of automotive catalysts. The method was efficient for a variety of important catalytic reactions in the scope of the automotive emission control. We demonstrated the efficiency of our approach by comparing our data with experimental results including both simple laboratory experiments and chassis dynamometer exhaust gas emission control experiments.
2016-10-25
Technical Paper
2016-36-0214
Guilherme Torres Ferreira, Gustavo Tineli, Martin Herrmann
Abstract Many software functions currently available in the engine control units have been developed for several years (decades in some cases), reengineered or adapted due to new requirements, what may add to their inherent complexity an unnecessary complication. This paper deals with the study and implementation of a software reengineering strategy for the embedded domain, which is in transfer from research department to product development, here applied to improve maintainability of flex fuel functions. The strategy uses the SCODE “Essential Analysis”, an approach for the embedded system domain. The method allows to reduce the system complexity to the unavoidable inherent problem complexity, by decomposing the system into smaller sub problems based on its essential physics. A case study was carried out to redesign a function of fuel adaptation. The analysis was performed with the support of a tool, which covers all the phases of the method.
2016-09-27
Technical Paper
2016-01-8122
Jiaqi Xu, Hwan-Sik Yoon, Jae Y. Lee, Seonggon Kim
Abstract A neural network-based computer vision system is developed to estimate position of an excavator manipulator in real time. A camera is used to capture images of a manipulator, and the images are down-sampled and used to train a neural network. Then, the trained neural network can estimate the position of the excavator manipulator in real time. To study the feasibility of the proposed system, a webcam is used to capture images of an excavator simulation model and the captured images are used to train a neural network. The simulation results show that the developed neural network-based computer vision system can estimate the position of the excavator manipulator with an acceptable accuracy.
2016-09-20
Technical Paper
2016-01-2067
Qingchuan Shi, Kartik Lakshminarashimhan, Christopher Noll, Eelco Scholte, Omer Khan
Abstract Modern aircraft systems employ numerous processors to achieve system functionality. In particular, engine controls and power distribution subsystems rely heavily on software to provide safety-critical functionality, and are expected to move towards multicore architectures. The computing hardware-layer of avionic systems must be able to execute many concurrent workloads under tight deterministic execution guarantees to meet the safety standards. Single-chip multicores are attractive for safety-critical embedded systems due to their lightweight form factor. However, multicores aggressively share hardware resources, leading to interference that in turn creates non-deterministic execution for multiple concurrent workloads. We propose an approach to remove on-chip interference via a set of methods to spatio-temporally partition shared multicore resources.
2016-09-20
Technical Paper
2016-01-2044
Jeffrey J. Joyce, Scott Beecher, Laurent Fabre, Ramesh Rajagopalan
Abstract Over the past few decades, advanced methods have been developed for the analysis of digital systems using mathematical reasoning, i.e., formal logic. These methods are supported by sophisticated software tools that can be used to perform analysis far beyond what is practically achievable using “paper and pencil” analysis. In December 2011, RTCA published RTCA DO-178C [1] along with a set of technical supplements including RTCA DO-333 [2] which provides guidance on the use of formal methods towards the certification of airborne software. Such methods have the potential to reduce the cost of verification by using formal analysis instead of conventional test-based methods to produce a portion of the verification evidence required for certification.
2016-09-20
Technical Paper
2016-01-2052
Virgilio Valdivia-Guerrero, Ray Foley, Stefano Riverso, Parithi Govindaraju, Atiyah Elsheikh, Leonardo Mangeruca, Gilberto Burgio, Alberto Ferrari, Marcel Gottschall, Torsten Blochwitz, Serge Bloch, Danielle Taylor, Declan Hayes-McCoy, Andreas Himmler
Abstract This paper presents an overview of a project called “Modelling and Simulation Tools for Systems Integration on Aircraft (MISSION)”. This is a collaborative project being developed under the European Union Clean Sky 2 Program, a public-private partnership bringing together aeronautics industrial leaders and public research organizations based in Europe. The provision of integrated modeling, simulation, and optimization tools to effectively support all stages of aircraft design remains a critical challenge in the Aerospace industry. In particular the high level of system integration that is characteristic of new aircraft designs is dramatically increasing the complexity of both design and verification. Simultaneously, the multi-physics interactions between structural, electrical, thermal, and hydraulic components have become more significant as the systems become increasingly interconnected.
2016-09-18
Journal Article
2016-01-1948
Axel Freiwald, Gunn Hwang
Abstract Vehicle manufacturers are suffering from increasing expenses for fixing software issues. This fact is mainly driving their desire to use mobile communication channels for doing Software Updates Over The Air (SOTA). Software updates today are typically done at vehicle service stations by connecting the vehicles’ electronic network via the On Board Diagnostic (OBD) interface to a service computer. These operations are done under the control of trained technicians. SOTA means that the update process must get handled by the driver. Two critical aspects need to get considered when doing SOTA at Electronic Brake Control (EBC) systems. Both will determine the acceptance of SOTA by legal authorities and by the passengers: The safety and security of the vehicle The availability of the vehicle for the passengers The security aspect includes the necessity to protect the vehicle and the manufacturers IP from unwanted attacks.
2016-09-16
Journal Article
2016-01-9019
Jan Grüner, Stefanie Marker
Abstract Standardized driving cycles, such as the New European Driving Cycle (NEDC) in Europe or the Federal Test Procedure 75 (FTP-75) in the U.S. are an important tool to certify new vehicle models. They are used to estimate real world fuel consumption as well as real world emissions. The latter has recently become more important with the stronger focus on green driving, resulting in much stricter emission regulations, while fuel consumption still remains one of the most important aspects in terms of economy and long term costs for the vehicle owner. However these cycles do not reflect the actual behaviour of the driver or regional influences (i.e. topography). Therefore, manufacturers have developed their own usage and test cycles and are able to extract data from the vehicle to analyse the individual driving behaviour and vehicle usage. Apart from that, Naturalistic Driving Observation (NDO) is interested in understanding the driver.
2016-09-14
Technical Paper
2016-01-1879
Libo Huang, Liang Chang, Jie Bai, Huanlei Chen
Abstract Millimeter-wave automotive radars can prevent traffic accidents and save human lives as they can detect vehicles and pedestrians even in night and in bad weather. Various types of automotive radars operating at 24 and 77 GHz bands are developed for various applications, like adaptive cruise control, blind-spot detection and lane change assistance. In each year, millions of millimeter-wave radar are sold worldwide. Millimeter-wave radar is composed of radar hardware and radar signal processing software, which detects the targets among noise, measures the distance, longitudinal speed and the azimuth angle of the targets, tracks the targets continuously, and controls the ego vehicle to brake or accelerate. Performance of the radar signal processing software is closely related with the radar hardware properties and radar measurement conditions.
2016-09-14
Journal Article
2016-01-1903
Tao Wang, Weiwen Deng, Sumin Zhang, DaZhi Wang, Junyong Liu
Abstract Intelligent vehicles have gained increasing popularity in recent years as traffic safety and efficiency have become the major challenges faced by automotive industry. Vehicle positioning system, such as GPS, plays more and more important role on intelligent or autonomous driving. Intelligent vehicle technologies have been developed and tested mainly based on intensive field experiment under various driving scenarios. However, the large variation, uncertainty and complexity of the driving environment, including buildings, traffic and weather conditions have posed great challenges on test repeatability and system robustness. This paper proposes a GPS model considering software-centered observation errors. The focus of the research is on its error to reflect the real signals from GPS measurement.
2016-04-05
Technical Paper
2016-01-0549
Hai Wu, Meng-Feng Li
Abstract A GT-Power Fast Run Model simplified from detail model for HIL is verified with a bench test using the dSPACE Simulator. Firstly, the conversion process from a detailed model to FRM model is briefly described. Then, the spark timing, fuel pulse with control for FAR, and torque level control are developed for proof of concept. Moreover a series of FRM/Simulink co-simulation and HIL tests are conducted. In the summary, the test results are presented and compared with GT detailed model simulations. The test results show that the FRM/dSPACE HIL stays consistent in most variables of interest under 0.7-0.9 real-time factor condition between 1000 - 5000 RPM. The same steady-state can be reached by RCP controllers or with GT-Power internal controllers. The transient states are close using different control algorithm. The main purpose of HIL application is achieved, despite inconsistencies in performance data like fuel consumption.
2016-04-05
Technical Paper
2016-01-1419
Helen S. Loeb, Sam Chamberlain, Yi-Ching Lee
Abstract Motor vehicles crashes are the leading cause of injury and death of US teens. Driving simulators offer a way to safely expose drivers to specific events in a controlled and repeatable manner. They empower researchers by enabling them to compare different groups and driving behaviors and assess the cognitive and attention skills that are essential to safe driving. Classically, assessment of eye glances and gaze duration relies largely on time-consuming data reduction and video coding. In addition, the synchronization of eye tracker and simulator data is essential to a valid analysis of the eye glances patterns in relation to the driving scenario. To better understand and quantify eye glances in relation to a driving scene, Eyesync was developed as a synchronization bridge between an eye tracker and a driving simulator. It allows the real time synchronization and logging of eye tracking and simulator data. The design of the software is presented in this paper.
2016-04-05
Technical Paper
2016-01-0150
Felix Pistorius, Andreas Lauber, Johannes Pfau, Alexander Klimm, Juergen Becker
Abstract Various algorithms such as emergency brake or crash warning using V2X communication have been published recently. For such systems hard real-time constraints have to be satisfied. Therefore latency needs to be minimized to keep the message processing delay below a certain threshold. Existing V2X systems based on the IEEE 1609 and SAE J2735 standards implement most message processing in software. This means the latency of these systems strongly depends on the CPU load as well as the number of incoming messages per time. According to safety constraints all messages of nearby vehicles have to be processed, whereby no prediction of the message importance can be given without analyzing the message content. Regarding the aforementioned requirements we propose a novel architecture that optimizes latency to satisfy the hard real-time constraints for V2X messages.
Viewing 1 to 30 of 149

Filter