Criteria

Text:
Display:

Results

Viewing 1 to 30 of 1616
2017-11-07
Technical Paper
2017-36-0109
Haraldo Rehder, Gustavo P. Rehder
Abstract Environmental damage and climate change, air pollution, energy efficiency, fuel consumption and emissions are subjects for studies and legislations worldwide. Brazil must therefore be prepared to follow global trends in energy optimization tests and developments, including Euro 6 equivalent emission legislation. Considering the worldwide tendency for Real Driving Condition Test for heavy vehicles, the authors, using the developed Towing Trailer Prototype provided with an electromagnetic brake, performed fuel consumption on-road tests. For measuring fuel consumption on-road or on testing tracks, the developed system allows initially measurements with an independent auxiliary tank for short distances and measurement with an auxiliary tank connected with the truck tank for long distances. The tests were performed on road in real conditions initially by maximum speeds of 75 km/h.
2017-11-05
Technical Paper
2017-32-0060
Hiroto Takahashi, Toshiki Shinohara
Many general purpose engines, such as the ones used in construction machines, operate in environments with excessive amounts of airborne dust, and are thereby equipped with a cyclone air cleaner so that they can remove as much dust from contaminated air streams in the engine. However, the compact general purpose engine is mainly a single-cylinder type, and the intake flow pulsates. Since the centrifugal action of the cyclone air cleaner under the intake pulsation changes according to the pulsation, it is difficult to enhance the dust separation performance. In this study, we aimed to determine a cyclone air cleaner factor with high purification performance even under the intake pulsation conditions of a general purpose engine. We have designed an ideal geometry for the cyclone air cleaner, which centrifugally separates dust during inhaling and discharges the centrifuged dust using positive pressure due to pulsation.
2017-10-08
Technical Paper
2017-01-2205
Velmurugan M A, MahendraMohan Rajagopal
Abstract Agricultural tractors are often subjected to various applications like front end loading work, cultivation work, where frequent forward and reverse gears are needed. Most of Indian agricultural tractors are equipped with mechanical transmission system which demands repeated clutching and de-clutching operation for such applications resulting in increased operator fatigue and lesser productivity. Also need of electronics in Indian agricultural industry for better farm mechanization is growing high. This research work depicts development of electronic bi-directional shifting (power shuttle) control design and calibration for farm vehicle fitted with wet clutch transmission. This research also reduces operator fatigue via frequent directional shift through electronic transmission. The control system is designed without any electronic interfacing with engine and also provides clutch-less gear shifting and auto-launch which offers ease to drive even for novice driver.
2017-07-10
Technical Paper
2017-28-1925
Asif Basha Shaik Mohammad, Ravindran Vijayakumar, Nageshwar Rao Panduranga
Abstract The automotive market has seen a steady increase in customer demands for quiet and more comfortable tractors. High noise at Operator Ear Level (OEL) of tractor is the major cause of fatigue to the operator. With growing competition, and upcoming legislative requirement there is ominous need for the agricultural tractor manufacturers to control noise levels. The objective of this study is noise reduction on agricultural tractor by stiffening sheet metal components. The design and analysis plays a major role for determining the root cause for the problem. Once the problem and its root cause were well defined, the solution for addressing the problem would be made clear. The engine excitation frequency and Sheet metal Components such as fender and platform natural frequency were coming closer and are leading to resonance.
2017-07-10
Technical Paper
2017-28-1976
Suresh Kumar Narayana Rao
Abstract The utility of tractors in India has grown and is growing. Other than in agricultural area, it finds use in non-agricultural and construction/ earthmoving applications like loaders, dozers, power source, etc. The tractors that are subjected to heavy duty cycles are mostly with conventional dry type clutches. These types of dry clutch when operated in heavy application generate large amount of heat within shorter period of time on the surface of friction discs. This increase in disc surface temperature weakens the friction material property & bonding element leading to deterioration and decreasing the life of clutch. This curtails the clutch life extensively and is a big challenge to farmers and tractor users. The frequent clutch failures not only increases the operating cost, but also the servicing of clutches in the tractor fitted with heavy attachments leads to a higher downtime and service cost.
2017-06-05
Technical Paper
2017-01-1839
Edward T. Lee
Abstract It is common for automotive manufacturers and off-highway machinery manufacturers to gain insight into the system’s structural dynamics by evaluating the system inertance functions near the mount locations. The acoustic response of the operator’s ears is a function of the vibro-acoustic characteristics of the system structural dynamics interacting with the cavity, with the actual load applied at the mount locations. The overall vibro-acoustic characteristics can be influenced by a change in local stiffness. To analyze the response of a system, it is necessary to go beyond analyzing its transfer functions. The actual load needs to be understood and applied to the transfer function set. Finite element (FE) based analysis provides a good foundation for deterministic solutions. However the finite element method decreases in accuracy as frequency increases.
2017-06-05
Technical Paper
2017-01-1834
Dirk von Werne, Prasanna Chaduvula, Patrick Stahl, Michael Jordan, Jamison Huber, Korcan Kucukcoskun, Mircea Niculescu
Abstract Fan noise can form a significant part of the vehicle noise signature and needs hence to be optimized in view of exterior noise and operator exposure. Putting together unsteady CFD simulation with acoustic FEM modeling, tonal and broadband fan noise can be accurately predicted, accounting for the sound propagation through engine compartment and vehicle frame structure. This paper focuses on method development and validation in view of the practical vehicle design process. In a step by-step approach, the model has been validated against a dedicated test-set-up, so that good accuracy of operational fan noise prediction could be achieved. Main focus was on the acoustic transfer through the engine compartment. The equivalent acoustic transfer through radiators/heat exchangers is modeled based on separate detailed acoustic models. The updating process revealed the sensitivity of various components in the engine compartment.
2017-06-05
Technical Paper
2017-01-1835
Nader Dolatabadi, Ramin Rahmani, Stephanos Theodossiades, Homer Rahnejat, Guy Blundell, Guillaume Bernard
Abstract Clutches are commonly utilised in passenger type and off-road heavy-duty vehicles to disconnect the engine from the driveline and other parasitic loads. In off-road heavy-duty vehicles, along with fuel efficiency start-up functionality at extended ambient conditions, such as low temperature and intake absolute pressure are crucial. Off-road vehicle manufacturers can overcome the parasitic loads in these conditions by oversizing the engine. Caterpillar Inc. as the pioneer in off-road technology has developed a novel clutch design to allow for engine downsizing while vehicle’s performance is not affected. The tribological behaviour of the clutch will be crucial to start engagement promptly and reach the maximum clutch capacity in the shortest possible time and smoothest way in terms of dynamics. A multi-body dynamics model of the clutch system is developed in MSC ADAMS.
2017-06-05
Technical Paper
2017-01-1832
Giovanni Rinaldi, Jason Edgington, Brian Thom
Abstract Typical approaches to regulating sound performance of vehicles and products rely upon A-weighted sound pressure level or sound power level. It is well known that these parameters do not provide a complete picture of the customer’s perception of the product and may mislead engineering efforts for product improvement. A leading manufacturer of agricultural equipment set out to implement a process to include sound quality targets in its product engineering cycle. First, meaningful vehicle level targets were set for a tractor by conducting extensive jury evaluation testing and by using objective metrics that represent the customer’s subjective preference for sound. Sensitivity studies (“what-if” games) were then conducted, using the predicted sound quality (SQ) index as validation metric, to define the impact on the SQ performance of different noise components (frequency ranges, tones, transients).
2017-06-05
Technical Paper
2017-01-1858
James Haylett, Andrew Polte
Abstract Truck and construction seats offer a number of different challenges compared to automotive seats in the identification and characterization of Buzz, Squeak, and Rattle (BSR) noises. These seats typically have a separate air or mechanical suspension and usually a larger number and variety of mechanical adjustments and isolators. Associated vibration excitation tend to have lower frequencies with larger amplitudes. In order to test these seats for both BSR and vibration isolation a low-noise shaker with the ability to test to a minimum frequency of 1 Hz was employed. Slowly swept sine excitation was used to visualize the seat mode shapes and identify nonlinearities at low frequencies. A sample set of seat BSR sounds are described in terms of time and frequency characteristics, then analyzed using sound quality metrics.
2017-06-05
Technical Paper
2017-01-1847
Asif Basha Shaik Mohammad, Ravindran Vijayakumar, Nageshwar rao.P
Abstract Tractor operators prefer to drive more comfortable tractors in the recent years. The high noise and vibration levels, to which drivers of agricultural tractor are often exposed for long periods of time, have a significant part in the driver’s fatigue and may lead to substantial hearing impairment and health problems. Therefore, it is essential for an optimal cabin design to have time and cost effective analysis tools for the assessment of the noise and vibration characteristics of various design alternatives at both the early design stages and the prototype testing phase. Airborne excitation and Structure Borne excitation are two types of dynamic cabin excitations mainly cause the interior noise in a driver’s cabin. Structure-borne excitation is studied in this paper and it consists of dynamic forces, which are directly transmitted to the cabin through the cabin suspension. These transmitted forces introduce cabin vibrations, which in turn generate interior noise.
2017-05-10
Technical Paper
2017-01-1927
Andreas Graef
China’s construction equipment (CE) market has been shrinking since 2011 with only few machinery segments gaining sales in last few years. Most of China’s CE machinery segments are already highly concentrated with few major Chinese CE OEMs contributing the majority of sales volume in each machinery segment. Machinery segments with more advanced technology such as crawler excavators see the rise of Chinese CE OEM competing with their international peers on market shares. Chinese full-liner OEMs are expected to shift their global M&A strategies in light of China’s enforced governmental control of capital outflows and increased scrutiny over the authenticity and compliance of overseas investments. With this market and competitor dynamics in China, the key question for international CE powertrain system and component supplier is how Chinese CE OEM and engine supplier develop and source their key powertrain components in future.
2017-05-10
Technical Paper
2017-01-1932
Thomas Herlitzius
The digital transformation offers Europe tremendous opportunities of more efficient production using Cyber Physical Systems (CPS), which will enable new concepts for future farming systems. The very fast development of information and communication technologies is driving the evolution of mobile machines into cyber-physical systems with virtually no limitations for communication. Automation is the most important trend in the development of agricultural mobile machines due to the open potential of efficiency increases at all levels (machine, process and farm operation). CPS technologies are going to deliver solutions at the system and enterprise level by supporting real time and strategic decisions while enabling much higher system transparency and controllability within the sustainability tri-angle.
2017-05-10
Technical Paper
2017-01-1929
Ludger Frerichs, Steffen Hanke, Sebastian Steinhaus, Lennart Trösken
Along with the European Union’s objective of further reduction of greenhouse gas emissions, manufacturers of agricultural machines want to make their contribution and highlight potential fuel savings. The research project “EKoTech - Efficient fuel use in agricultural technology”, funded by the German Ministry of Agriculture, involves well-known manufacturers and research facilities. The essential objective of this project is to identify savings realized since 1990 and savings potentials until 2030. Further aims are the development of a method and a tool for the evaluation of efficiency measures in process chains and the formulation of recommendations for manufacturers, operators and research facilities. A comprehensive search of fuel consumption and power requirement data of relevant machines and processes provides the database. Additionally typical region-specific operational structures, machine equipment and process chains define model farms.
2017-05-10
Technical Paper
2017-01-1923
Wayne Eckerle, Vivek Sujan, Gary Salemme
Countries around the world are expected to continue to adopt more stringent emissions standards for heavy-duty markets for both oxides of nitrogen (NOx) and greenhouse gases (GHG). While there is uncertainty about the timing and extent of these regulations, it is clear that significant reductions will be required to address urban air pollution and climate change concerns. The rate and pace of technology evolution and how it will affect the energy pathways for commercial transportation and industrial use are dependent on multiple variables such as national energy and environmental policies and public-private partnerships. Although it adds complexity, the engine system has great potential to evolve as it continues to be highly integrated into the super system for which it is producing power. This paper examines the potential opportunities and challenges for engine manufacturers to continue to be the supplier of power to vehicles and equipment of the future.
2017-05-10
Technical Paper
2017-01-1924
Hagen Adam
Abstract No abstract available.
2017-05-10
Technical Paper
2017-01-1922
Wolfgang Burget
Highly diversified market needs, non-harmonized regulations and new technological trends in future construction machinery industry will challenge OEMs in defining their appropriate development strategies. Main trends like “efficiency”, “safety/security” as well as “connectivity” are considered as important driving forces in future product - and customer service - developments. Some examples are given for the above mentioned trends. Chances and related risks of such development trends are considered as well.
2017-05-10
Technical Paper
2017-01-1936
Ulrich Fass, Jenny Elfsberg
Abstract No abstract available.
2017-05-10
Technical Paper
2017-01-1935
Florian Rahe, Rainer Resch
In this paper, we present our views on the electrification of agricultural machinery, especially electrification with voltages higher than 12 volts - even up to 700 volts. Requirements on modern agricultural machinery have changed drastically in recent decades. Electronic controls became standard - resulting in increased electrical power requirements. At Agritechnica 2007, John Deere and Rauch presented a tractor-implement combination using 400V AC, which prompted avid further development of this technology in agriculture. We will present our experiences with the electrification of some implements. For each development, we had a different focus and the results will be discussed. Furthermore, we will provide a short overview of possible efficiency improvements thanks to electrification and an analysis of the demands. A conclusion with an outlook on the real requirements and upcoming solutions from our perspective will complete this paper.
2017-05-10
Technical Paper
2017-01-1933
Werner Seifried
Concerning the limitation of greenhouse gases, the Kyoto protocol in 1997defined the first hard facts. A steady increase in the number of participating states as well as a rigorous focus on emission limits - even if some important countries did not sign or withdraw from the protocol - led to high pressure on existing technologies. The presentation therefore will start by discussing the four pillars of possible CO2 reduction options and will lead to the question why there is a correlation to assistance systems on hydraulic excavators. Finally innovative excavator assistance systems and their support to the objectives on CO2 reduction will be presented.
2017-03-28
Technical Paper
2017-01-0136
Apostolos Karvountzis-Kontakiotis, Apostolos Pesiridis, Hua Zhao, Fuhaid Alshammari, Benjamin Franchetti, Ioannis Pesmazoglou, Lorenzo Tocci
Abstract Modern heavy duty diesel engines can well extend the goal of 50% brake thermal efficiency by utilizing waste heat recovery (WHR) technologies. The effect of an ORC WHR system on engine brake specific fuel consumption (bsfc) is a compromise between the fuel penalty due to the higher exhaust backpressure and the additional power from the WHR system that is not attributed to fuel consumption. This work focuses on the fuel efficiency benefits of installing an ORC WHR system on a heavy duty diesel engine. A six cylinder, 7.25ℓ heavy duty diesel engine is employed to experimentally explore the effect of backpressure on fuel consumption. A zero-dimensional, detailed physical ORC model is utilized to predict ORC performance under design and off-design conditions.
2017-03-28
Technical Paper
2017-01-0137
Akira Ando, Koichi Hamashima, Shinji Kato, Noriyuki Tomita, Takahiro Uejima
Abstract In respect to the present large refrigerator trucks, sub-engine type is the main product, but the basic structure does not change greatly since the introduction for around 50 years. A sub-engine type uses an industrial engine to drive the compressor, and the environmental correspondence such as the fuel consumption, the emission is late remarkably. In addition, most of trucks carry the truck equipment including the refrigerator which consumes fuel about 20% of whole vehicle. Focusing on this point, the following are the reports about the system development plan for fuel consumption reduction of the large size refrigerator truck. New concept is to utilize electrical power from HV system to power the electric-driven refrigerator. We have developed a fully electric-driven refrigerator system, which uses regenerated energy that is dedicated for our refrigerator system.
2017-03-28
Journal Article
2017-01-1554
Ajith Jogi, Sujatha Chandramohan
Abstract Over the years, commercial vehicles, especially tractor-semitrailer combinations have become larger and longer. With the increasing demand for their accessibility in remote locations, these vehicles face the problem of off-tracking, which is the ensuing difference in path radii between the front and rear axles of a vehicle as it maneuvers a turn. Apart from steering the rear axle of the semitrailer, one of the feasible ways of mitigating off-tracking is to shift the fifth wheel coupling rearwards. However, this is limited by the distribution of the semitrailer’s load between the two axles of the tractor; any rearward shift of the fifth wheel coupling results in the reduction of the total static load on the tractor’s front axle and hence available traction. This may in turn lead to directional instability of the vehicle. In the present work, a new model of the fifth wheel coupling is proposed which the authors call Split fifth wheel coupling (SFWC).
2017-03-28
Technical Paper
2017-01-1580
Smitha Vempaty, Yuping He
Abstract Ensuring the lateral stability and handling of a car-and-trailer combination remains one of the challenges in safety system design and development for articulated vehicles. This paper reviews the state-of-the-art approaches for car-trailer lateral stability control. A literature review covering the effects of external factors, such as aerodynamic forces, tire forces, and road & climatic conditions, is presented. To address the effects of these factors, researchers have previously investigated numerous passive and active safety control techniques. This paper intends to identify the inadequacies of the passive safety approaches and analyzes promising active-control schemes, such as active trailer steering control (ATSC), active trailer braking (ATB) and model reference adaptive controller (MRAC). A comparative study of these control strategies in terms of applicability and cost effectiveness is performed.
2017-03-28
Technical Paper
2017-01-1588
Yucheng Liu, Collin Davenport, James Gafford, Michael Mazzola, John Ball, Sherif Abdelwahed, Matthew Doude, Reuben Burch
Abstract A dynamic modeling framework was established to predict status (position, displacement, velocity, acceleration, and shape) of a towed vehicle system with different driver inputs. This framework consists of three components: (1) a state space model to decide position and velocity for the vehicle system based on Newton’s second law; (2) an angular acceleration transferring model, which leads to a hypothesis that the each towed unit follows the same path as the towing vehicle; and (3) a polygon model to draw instantaneous polygons to envelop the entire system at any time point. Input parameters of this model include initial conditions of the system, real-time locations of a reference point (e.g. front center of the towing vehicle) that can be determined from a beacon and radar system, and instantaneous accelerations of this system, which come from driver maneuvers (accelerating, braking, steering, etc.) can be read from a data acquisition system installed on the towing vehicle.
2017-03-28
Technical Paper
2017-01-1503
Jared Johan Engelbrecht, Tony Russell Martin, Piyush M. Gulve, Nagarjun Chandrashekar, Amol Dwivedi, Peter Thomas Tkacik, Zachary Merrill
Abstract Most commercial heavy-duty truck trailers are equipped with either a two sensor, one modulator (2S1M) or four sensors, two modulator (4S2M) anti-lock braking system (ABS). Previous research has been performed comparing the performance of different ABS modules, in areas such as longitudinal and lateral stability, and stopping distance. This study focuses on relating ABS module type and wheel speed sensor placement to trailer wheel lock-up and subsequent impact to tire wear for tandem axle trailers with the Hendrickson air-ride suspension. Prior to tire wear inspection, functionality of the ABS system was testing using an ABS scan tool communicating with the SAE J1587 plug access port on the trailer. Observations were documented on trailers using the 2S1M system with the wheel speed sensor placed on either the front or rear axle of a tandem pair.
2017-03-28
Technical Paper
2017-01-1540
Yuri M. Lopes, Maxwell R. Taylor, Todd H. Lounsberry, Gregory J. Fadler
Abstract Typical production vehicle development includes road testing of a vehicle towing a trailer to evaluate powertrain thermal performance. In order to correlate tests with simulations, the aerodynamic effects of pulling a trailer behind a vehicle must be estimated. During real world operation a vehicle often encounters cross winds. Therefore, the effects of cross winds on the drag of a vehicle–trailer combination should be taken into account. Improving the accuracy of aerodynamic load prediction for a vehicle-trailer combination should in turn lead to improved simulations and better thermal performance. In order to best simulate conditions for real world trailer towing, a study was performed using reduced scale models of a Sport Utility Vehicle (SUV) and a Pickup Truck (PT) towing a medium size cargo trailer. The scale model vehicle and trailer combinations were tested in a full scale wind tunnel.
2017-03-28
Technical Paper
2017-01-1318
Prashant Khapane, Suresh Bhosale
Abstract Robustness to sand dune impact is one of the key requirements for Jaguar Land Rover products. Historically off road vehicles were built on a ladder sub frame; and the steel cross beam at the front provided robust protection for the cooling pack. With the move to monocoque construction, the cooling pack became vulnerable to low speed grounding damage. Unfortunately this vulnerability is not confirmed until later in the program when fully representative vehicles are available, which results in late engineering changes that are expensive, time consuming and stressful. Like all late changes it is rarely optimised for cost and weight. With no historic literature or procedure available, the challenge was to model the physics of sand media and also solve the complex multi-physics problem of impact of the whole vehicle with the sand dune.
2017-03-28
Technical Paper
2017-01-1012
Sunil Kumar Pathak, Vineet sood, Yograj Singh, Salim Abbasbhai Channiwala
Abstract In developing countries like India, large numbers of portable gensets are used as a power source due to the scarcity of grid power supply. The portable gensets, ranging from 0.5 kW to 5 kW are very popular in the residential areas, for example, small restaurants, and shopping complexes, etc. These gensets are using various fuels like gasoline, diesel, LPG, and kerosene in small internal combustion engines. Such engines are the significant source of air pollution, as these are running in the vicinity of populated areas and higher human exposure to these pollutants.Theses gensets are regulated by exhaust and noise emissions norms, set by statutory bodies like the ministry of environment and forest and central pollution control board of India.
2017-03-28
Technical Paper
2017-01-0090
Ondrej Santin, Jaroslav Beran, Jaroslav Pekar, John Michelini, Junbo Jing, Steve Szwabowski, Dimitar Filev
Abstract Conventional cruise control systems in automotive applications are usually designed to maintain the constant speed of the vehicle based on the desired set-point. It has been shown that fuel economy while in cruise control can be improved using advanced control methods namely adopting the Model Predictive Control (MPC) technology utilizing the road grade preview information and allowance of the vehicle speed variation. This paper is focused on the extension of the Adaptive Nonlinear Model Predictive Controller (ANLMPC) reported earlier by application to the trailer tow use-case. As the connected trailer changes the aerodynamic drag and the overall vehicle mass, it may lead to the undesired downshifts for the conventional cruise controller introducing the fuel economy losses. In this work, the ANLMPC concept is extended to avoid downshifts by translating the downshift conditions to the constraints of the underlying optimization problem to be solved.
Viewing 1 to 30 of 1616