Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 59
2017-09-01
Magazine
Knowledge wins at 2017 Formula SAE Lincoln The University of Pennsylvania and Texas A&M win the Electric and Internal Combustion Classes, respectively. Flying high at SAE Aero Design New for the twin 2017 competitions in Texas and Florida was a requirement for planes registered in the Regular Class to carry "passengers." Pedal to the metal at Formula SAE Michigan More than 100 university teams compete in this premier student racecar design competition combining static and dynamic events. Removing bumps on the path to fully automated driving Inaugural workshop for new AutoDrive Challenge student competition held at SAE World Headquarters.
2017-08-03
Magazine
Collaborating on diesel emission control Stringent fuel-efficiency and criteria-pollutant standards call for new combustion strategies. The SwRI-led Advanced Combustion Catalyst and Aftertreatment Technologies consortium reinvents existing technologies and experiments with new catalysts to meet standards. More intelligence equals more efficiency, enhanced functionality Advanced systems require renewed focus on architectures, processors, sensors and networks. Appraising the potential for platooning in the U.S. Researchers from the National Renewable Energy Laboratory perform statistical analysis based on a large collection of real-world U.S. truck usage data to estimate the fraction of total miles that are technically suitable for platooning. Connected commercial vehicles bring cybersecurity to the fore Connectivity, automation and electrification will largely drive vehicle developments in the coming years, according to experts presenting at the revamped SAE COMVEC 17.
2017-03-02
Magazine
Thought leadership at WCX17 Lucid Motors’ David Moseley: EV or ICE, “It is all physics” New eye on the road One of the industry’s hottest tech suppliers is blazing the autonomy trail by crowd-sourcing safe routes and using AI to learn to negotiate the road. Mobileye’s co-founder and CTO explains. Hard, slick and ready to roll A tough, self-renewing catalyst coating developed at Argonne National Laboratory provides unprecedented friction and wear protection for vehicle powertrains, the inventors claim. Sensor ICs, semiconductors and safety To achieve ISO 26262 compliance, engineering practices must be taken to a higher level. The following insights may prove valuable for getting there. New VCR targets 40% BTE Variable-compression ratio with VVA from France’s MCE-5.
2017-03-01
Magazine
‘Not just a student club’ How the University of Toronto Aerospace team (UTAT) came to redefine the mission and structure of the design team. Success doesn’t come by chance In an SAE International technical paper, students at the University of Idaho identify best practices for their SAE Clean Snowmobile Challenge team. Winning formula Auburn University team hopes to carry forward the momentum of victory at the 2016 Formula SAE Lincoln competition into 2017.
2017-02-02
Magazine
WCX17 Preview The annual SAE World Congress is rebranded WCX17 to express its expanded experience of new-technology discussion and established thought leadership. Achates powers toward production Achates Power's internal-combustion solution is a new play on an old technology. Inside the Bolt EV While the new battery deserves credit for the car's +200-mile range, systems optimization, careful motor design and proprietary CAE tools were equally important. CES 2017: Lush luxury EVs, sophisticated connectivity Suppliers challenge OEMs in advanced tech. Editorial: Question mark or exclamation point Supplier Eye Are you prepared for greater electrification? SAE Standards News VS committees fully engaged on cybersecurity.
2016-11-16
Magazine
Focus on advanced safety systems and human-factor interventions The impact of REACH on the aviation sector Considered the most comprehensive chemical-regulation legislation to date, REACH presents serious ramifications for the aircraft industry. Lightweighting: What's Next? Experts weigh in on the challenges and future enablers in the battle to reduce vehicle mass. The best of COMVEC 2016 Autonomous vehicles and improved fuel efficiency via advanced powertrain solutions are pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Optimizing waste heat recovery for long-haul trucks Autonomous solutions in agriculture Downsizing a HD diesel engine for off-highway applications Zero-emissions electric aircraft: Theory vs. reality
2016-09-01
Magazine
Solving the Greenhouse Gas puzzle While automakers and policymakers debate the TAR, engineers and product planners prepare for the steep climb to meet GHG and CAFE rules beyond 2022. Revving up thermal characterization in the component lab The latest generation of high-speed infrared cameras can capture airbag deployments and other fast-moving actions quickly and accurately. C3 consortium aims for soot solution A newly formed group of companies led by CFD specialists Convergent Science targets exhaust particulate reduction in the combustion chamber. Inside the autonomous vehicle With less focus on driver needs, comfort, safety, and occupant productivity will become key. Editorial: Bad gas?
2016-08-05
Magazine
Clearing the air Sensors, diagnostics and controls advance to help trap emissions. Bringing the heat on cooling technologies Electronic controls, variable-speed fans cool engines, heat aftertreatment systems. 3D printing machines can't be built fast enough In the additive manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.
2016-08-04
Magazine
Special report: Lightweighting Uncovering the next actions in the industry's grand mass-reduction campaign. CAE's next leap forward With 3D simulations skyrocketing, engineers are looking forward to highly-optimized toolsets to keep pace with complexity. SAE Convergence 2016 Preview Meet the disruptors, network with peers and learn about the latest tech solutions that are rapidly changing the auto industry. "Military-grade" aluminum Jaguar, Exa say simulation to eliminate prototypes by 2020 OEMs expand testing of FEV variable-compression ratio engine Growth of FCVs and EVs tied to infrastructure Bolt EV seat design cuts weight, delights tall passengers Rolls-Royce reveals a Vision of its future Volvo bets on new PowerPulse, not 48V, to attack turbodiesel 'lag' SEAT to spearhead VW's new platform and 48V technology Dr. Jay Baron of CAR discusses vehicle lightweighting and predicts the outcome of the crucial CAFE mid-term review.
2016-04-01
Magazine
CMU goes full futuristic A student team from Carnegie Mellon University offers its take on a proposed new mode of transportation involving tubes and pods. Three CDS teams win MOMENTUM design awards Teams from British Columbia Institute of Technology, University of Idaho and Pakistan Navy Engineering College win competition for best description of an innovation for their 2016 SAE Collegiate Design Series vehicle entry. These pro tips can earn your CDS team point Members of SAE International's Collegiate Design Series staff offer 10 tips to help teams fully realize their potential at competition.
2016-02-05
Magazine
Off-highway hybrids: Opportunities and challenges With oil prices declining and emissions regulations in North America 'stabilized,' is there a place for hybrid powertrains in this new world of cheap oil? Looking for a better image Display advances are helping to reduce operator fatigue. Charging up electrified powertrains Control technologies race forward while batteries improve and adopt standard sizes. Measuring and accounting for suspension TARDEC teamed with SEA Ltd. to develop a system to measure the suspension parameters, center of gravity, and moments of inertia of wheeled vehicles in the never ending quest to model and predict vehicle dynamic behavior. Looking at mobility in 2050 Cuneyt L. Oge begins his term as 2016 SAE International President with a vision about the future of auto- and aero-mobility.
2016-02-03
Magazine
Baking in protection With vehicles joining the Internet of Things, connectivity is making cybersecurity a must-have obligation for automotive engineers, from initial designs through end-of-life. New Engines 2016 Highlighting the design, engineering, and technologies inside some of the most competitive new gasoline and light-duty diesel ICEs. Citizen of the world Cuneyt L. Oge begins his term as 2016 SAE International President with a vision about auto-mobility and aero-mobility 2050. CES rollouts extend connectivity, app integration Ford looks to spread Corning's new lightweight Gorilla Glass beyond the 2017 GT New 40%-scale wind tunnel increases GM's aero-development capacity Surface Generation speeds composites throughput with one-shot stamp-forming process 2017 Cadillac XT5 debuts GM's new lightweight crossover architecture Porsche and Bentley plan electric future
2016-02-01
Magazine
Stanford goes solar down under Team takes sixth place in Bridgestone World Solar Challenge to cap a rigorous two-year design and development program. Taking the lead Being in charge of an SAE Student Chapter entails everything from organizing meetings to issuing 'nastygrams.' A winning video from a winning Collegiate Design Series team The defending champion of the Formula SAE Michigan competition, Oregon State University, has found another way to win. SAE U.K. Section co-hosts lecture series 'starring' NASA engineer/expert Dr. Ravi Margasahayam of NASA is the engineer responsible for ensuring payload safety for the Space Shuttle and the International Space Station.
2015-06-17
Magazine
Transmission: on a mission Ian Adcock speaks with Oerlikon Graziano's head of performance, automotive, Paolo Mantelli, about the revolution ahead for transmission systems. Inside the proving factory Ian Adcock reports on a new business model designed to bridge the skills gap between engineering start-ups and the motor industry. Sensing danger, maximum response Automotive Design looks into passenger safety systems.
2012-11-06
Magazine
Big shifts coming in powertrains During the rest of this decade, many observers expect transmission controls to undergo more changes than in the past 10-15 years. Transmission controls are being revamped to meet tighter fuel economy laws, letting engines run at optimal speeds. Collaborating for cheaper carbon fiber Oak Ridge National Laboratory and several industry partners work together to overcome the challenges to lower-cost carbon fiber. Creating the 54.5-mpg car Part 2 of AEI's three-part series looks at how vehicle engineers are facing a 'stress test' as the countdown to 2025 CAFE begins. How will the aggressive new regulations influence U.S. passenger cars in the next decade-and what will they cost to implement?
2012-07-03
Magazine
Light and mighty Finding innovative ways to reduce vehicle weight while maintaining vehicle safety will be key to achieving the 2025 fuel-economy target. Controllers bulk up to manage engine's intricacies Chips hold more memory and boost throughput to help improve fuel efficiency. Electric Renault also focused on internal combustion Already becoming known in Europe as the 'electric company,' Renault, together with Alliance partner Nissan, is determined to pursue EV solutions but in parallel with intensive ICE programs, says Philippe Klein, Renault's Vice President, Corporate Planning, Product Planning, and Programs. Volvo plugs into high technology The company may be on a high-technology roll with its new plug-in diesel hybrid and its shift to a maximum four-cylinder philosophy-with three-cylinder units likely, according to Peter Mertens, Senior Vice President of Research & Development.
2011-11-17
Magazine
Technology crosses industry borders Between the commercial- and military - vehicle markets, knowledge sharing and tech transfer benefit both in areas such as vehicle electrification and alternative fuels.
2011-11-01
Magazine
Driving the pace of change Engineers speak out on software's impact on the automotive industry in online survey. Inside ZF's nine-speed transaxle for 2012 AEI travels to Friedrichshafen for an exclusive look at the development and technology behind the 9HP--the industry's first nine-speed transaxle slated for MY2013 production. Technology crosses industry borders Between the commercial- and military vehicle markets, knowledge sharing and tech transfer benefits both in areas such as vehicle electrification and altenative fuels. Cutting the cost of carbon Automakers streamline production to reduce the price premium for lightweight carbon fiber.
2011-10-12
Magazine
Digital aerospace gets dynamic Aerospace design is advancing from the static to the dynamic as PLM and simulation tools enable systems architects to design validated systems earlier in the process. Internet connectivity goes worldwide Coverage permitting Web access is growing and getting faster.
2010-09-07
Magazine
Optimizing the replacement for engine displacement New boosting and fuel-delivery technologies, and even twin-cylinder ICEs, are among the solutions being employed by powertrain engineers aiming for the next round of fuel-consumption and emissions targets. Back to basics Top Toyota executives discuss steps taken to bolster quality control during the development process while still forging ahead with new innovative product. Hyundai builds on success The company and Kia share European technologies and facilities, but they maintain individual model and marque identities as their presence strengthens. Teeming with ideas Automakers and suppliers get together to address consumer-electronics-friendly life cycles.
2010-04-01
Magazine
Teaming to win Oregon State University and Duale Hochschule Baden-Wurttemberg-Ravensburg announce global formula racing collaboration. Exploring Michigan's solar continuum A look back at the winning car's solar energy management strategy reveals the crucial role of software tools in the success. Engineering is art At Audi, design and engineering work together to create vehicles that meld aesthetics with physical necessity.
2010-03-01
Magazine
Risk, adventure, and learning from the past The Cal Poly 2009 Formula hybrid car with the funny wheels took first place in the "Hybrid in Progress" category. North American international auto show concepts The most significant vehicles features either full- or hybrid-electric powertrains, signaling the industry's intent to further electrify the new car world. Collaboration, innovation on agenda SAE 2010 World Congress to offer more focused technology and cost-saving solutions.
2010-02-01
Magazine
Giving the blind the freedom to drive A Virginia Tech student team answers a call to action by the National Federation of the Blind's Jernigan Institute. 'Ultimate Youthmobile' of 2030 At the 2009 LA Auto Show, California designers envision the future. BMW's six-cylinder motorcycle Concept points to possible production bike. Modeling and simulation put emphasis on early planning The shift to model-based design and simulation is changing the way aircraft are designed, shifting the focus to the early phases of development. Early planning is critical for success, as is establishing techniques that ensure that files move freely between various work teams.
2009-11-25
Magazine
Collaboration goes digital Aerospace users and tool providers alike are making digital collaborations more effective than ever.
2009-02-01
Magazine
Whistle down the wire Collaboration between OEMs and suppliers leads to new advances, and challenges, for electrohydraulic system control. Chipping away at drivetrain challenges Chips, sensors, controllers, software all combine to help engineers improve efficiency. Engineering disciplines unite Design tools help disparate groups provide input throughout the development process. Innovative thinking 101 West Virginia University professor Dr. James E. Smith issues a call for innovation as one of the central themes of his term as SAE's 2009 President.
2008-10-01
Magazine
Teaming up for quality Suppliers, customers, and industry groups all work together in drive to reduce problems. Next-gen nav/comm Advanced satellite capabilities revolutionize navigation, comminications, and surveillance. Composites come clean New scienceand processes are applied to next-generation materials.
Viewing 1 to 30 of 59

Filter

  • Magazine
    59