Criteria

Text:
Topic:
Sector:
Content:
Display:

Results

Viewing 1 to 23 of 23
2017-07-31
Article
Boeing and Tata Advanced Systems Limited announced delivery of the first crown and tailcone assembly for the Indian configuration of the CH-47F Chinook helicopter.
2015-10-19
Article
Two books from SAE International detail advancements in these areas through the compilation of relevant technical papers.
2015-01-12
Article
Oxford Performance Materials launched in December the first two grades of its OXFAB 3-D printing technology—OXFAB-N and OXFAB-ESD—suitable for aerospace and other industrial markets, including transportation, energy, and semiconductor applications. The company claims this is the first time PEKK is being used for 3-D printing in aerospace and industrial applications.
2014-03-24
Article
A sophomore nabbed the top spot in a steel wheels competition focused on eye-appealing, lightweight-structure concept renderings from Lawrence Technological University design students. The 2014 competition required student designers to use the engineering results from the Steel Market Development Institute’s Lightweight Steel Wheel Project.
2013-08-22
Article
UTC Aerospace Systems has been selected by The Boeing Co. to manufacture landing gear for the new Boeing 737 MAX. The contract calls for UTC to provide the nose and main landing gear in addition to the main gear side struts.
2013-02-07
Article
Researchers at NASA's Langley Research Center in Hampton, VA, are looking beyond the current state-of-the-art lightweight material—carbon-fiber composites—to promising nanostructured materials, namely carbon nanotube composites.
2012-07-16
Article
Disruptive technology usually means something so uniquely different that it requires manufacturers to adapt to it in sometimes significant ways. The trade-off is the promise of substantial advantages in cost, time, or performance.
2012-03-27
Article
MacLean-Fogg Component Solutions has announced the formation of the new Engineered Plastics Company (EPC)—a merger of its Polymer Technologies business in Whitewater, WI, with EPC of Menomonee Falls, WI.
2012-01-26
Article
Canadian researchers are finding ways to reduce landing noise in a facility designed to study the sounds that come from the interaction of certain airplane parts and wind.
2012-01-24
Article
Ball Aerospace & Technologies Corp. submitted a mission concept study to NASA for the storage and transfer of cryogenic propellants in space. Ball Aerospace was one of four companies awarded a six-month contract by NASA to develop a mission concept that demonstrates long-duration, in-space storage and transfer of cryogenic propellants.
2011-10-03
Article
United Technologies Corp. has reached agreement to purchase Goodrich Corp. for $127.50 per share in cash, equating to a total enterprise value of $18.4 billion, including $1.9 billion in net debt assumed.
2011-08-15
Article
Advanced measurement platforms are leading a growing trend in synchronization that reduces cabling, adds absolute time referencing, and optimizes data correlation for large systems.
2011-06-19
Article
Thermacore recently delivered Constant Conductance Heat Pipes (CCHPs) to NASA in support of its Global Precipitation Measurement (GPM) mission, as well as high thermally conductive k-Core structural components for the agency's Thermal Infrared Sensor (TIRS) program supporting the Landsat Data Continuity Mission (LDCM).
2011-04-29
Article
Meldin 7000 from Saint-Gobain Performance Plastics is a high-temperature solution for aerospace finished parts.
2011-01-20
Article
Simrit’s E454 EPDM (ethylene-propylene rubber) compound is certified to NAS 1613 Revision 5 Specification, which establishes the requirements for elastomer seal elements used in hydraulic systems using phosphate ester fluids.
2010-12-03
Article
Airbus selected Goodrich Corp. to provide the main landing gear for the -1000 variant of the A350 XWB aircraft. This selection covers the design, test, manufacture, and in-service support of the main landing gear.
2010-08-25
Article
Wolverine's MicroCool Division and Niagara Thermal Products have entered into a strategic collaborative alliance, focusing on the joint development of custom-engineered, aluminum cold plates for liquid cooling systems in complicated electronic devices for the global aerospace and defense markets.
2010-07-13
Article
Commercial Aircraft Corporation of China Ltd. (COMAC) selected Honeywell to provide the wheels and brakes, brake control system, and tires for the new C919 airliner. Honeywell’s carbon brake solution will reduce aircraft weight, translating into decreased operating costs from a lower fuel burn and a longer brake life.
2010-04-23
Article
The Lockheed Martin-led team developing the Orion crew exploration vehicle has completed fabrication of the world’s largest heat shield structure. The high-temperature composite material system, which is also suitable for commercial applications such as automobiles and heavy vehicles, was developed by the Lockheed Martin Orion thermal protection system team in partnership with TenCate Advanced Composites.
2009-09-03
Article
The Defense Logistics Agency–Ogden awarded a contract to Goodrich Corp. to provide carbon brakes and boltless wheels for the U.S. Air Force's fleet of C-130 transport aircraft. The contract, expected to generate up to $400 million in revenue over the life of the program, covers qualification activities as well as flight test and retrofit equipment.
2009-05-01
Article
Goodyear Aviation’s Flight Eagle LT (Light Turbine) tires are optimized for the high performance of entry level, very light, and light jet business segments.
2009-01-20
Article
Aeroquip Sure-Mate quick disconnect couplings from Eaton allow for easy, reliable connection and disconnection of lube oil, coolant, and hydraulic lines for civil and military aircraft as well as ground vehicle applications.
2009-01-14
Article
Goodrich selected the U.S. Air Force's Ogden Air Logistics Center (OO-ALC) at Hill AFB, UT, to provide specialty coatings on landing gear for the F-35 Lightning II fighter aircraft. The OO-ALC will apply high-velocity oxygenated fuel (HVOF) thermal spray coating on Goodrich landing gear components produced for the F-35.
Viewing 1 to 23 of 23

    Filter

    • Article
      23