Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 241 to 270 of 412
2011-05-31
Article
The HSC1 (heavy steer construction) and HDC1 (heavy drive construction) are two medium-sized radial truck tires from Continental designed for severe-duty applications.
2011-05-18
Article
Bourns’ combined torque and angle sensor is designed for electric power-assisted steering (EPAS) applications and other automotive systems.
2011-05-13
Article
Continental has come up with a new center stack module concept that it claims provides harmonious surfaces and greater freedom of design. One of the on-screen driver information sources is tire pressure monitoring, and Continental has just issued a recommendation that OEMs should use direct measuring technology with a sensor in each tire.
2011-05-05
Article
Dana Holding Corp. has launched a new line of SVL drivetrain components for the automotive, commercial-vehicle, and off-highway aftermarkets. Designed specifically for post-warranty vehicles with lower usage cycles, SVL products will initially launch in North America and feature universal joints for the light- and commercial-vehicle markets as well as ring and pinion gear sets for heavy-duty applications.
2011-05-04
Article
TRW Automotive Holdings has developed a vacuum sensor that measures and reports the level of vacuum available in the brake booster.
2011-04-29
Article
Meldin 7000 from Saint-Gobain Performance Plastics is a high-temperature solution for aerospace finished parts.
2011-04-18
Article
Looking ahead, according to MICO, no matter where you turn, the trend is to utilize the latest technology and innovative machine design to provide new benefits to the end user
2011-04-05
Article
Saint-Gobain Performance Plastics’ Norglide yoke bearing is designed to reduce friction for automotive steering applications and lower CO2 emissions.
2011-03-30
Article
"The future will be less about increasing power, more about reducing weight,” said Stephan Winkelmann, President and CEO of Automobil Lamborghini, as he revealed the manufacturing secrets of the company’s new Aventador LP 700-4.
2011-03-30
Article
Mico hydraulic-over-air relay valves convert modulated input pressure to a proportional output air pressure and are suited for various on- and off-highway applications.
2011-03-30
Article
Series 520 hydraulic-apply fixed caliper disc brakes from Mico use a modulated hydraulic pressure source to control brake torque for on- and off-highway service braking applications.
2011-03-28
Article
The new-generation XDR2 tire is said to offer 20% more tread for greater wear, durability.
2011-03-25
Article
Michelin’s ultrahigh-performance tire for the super sports car segment uses Teijin Aramid’s Twaron as a reinforcement material.
2011-03-25
Article
The Ferrari FF's unorthodox all-wheel-drive system powers the front wheels via a unique two-speed transmission module. Power is taken from the front of the 660-hp V12 engine.
2011-03-14
Article
Carpenter Technology’s Temper Tough ultrahigh-strength steel (UHSS) is an air-melted, cobalt-free quench and tempered alloy.
2011-03-14
Article
Cosma International engineers have produced a bimetallic engine cradle that meets General Motors' design and performance requirements.
2011-03-11
Article
Automobiles traditionally have been assembled using either unitized or body-on-frame construction. Uni-Chassis from Theodore & Associates provides an alternative by connecting stressed front and rear powertrain/suspension structures to a rigid backbone, eliminating the frame. The proof-of-concept chassis will be displayed for the first time at the SAE 2011 World Congress in Detroit.
2011-03-07
Article
Evaluation prototypes and design specifications for Wheelpump's Loewe on-wheel pump are available to automobile manufacturers and component OEMs.
2011-02-10
Article
Developing effective anti-vibration solutions is a never-ending task, not only because quality targets and expectations of manufacturers/customers rise inexorably, but because evolving designs and technologies bring fresh challenges.
2011-02-09
Article
New government regulations for shorter stopping distances, updated regulations for vehicle emissions, and the rising cost of fuel are causing both military customers and fleet customers to look at weight reduction in their vehicles.
2011-02-07
Article
Fallbrook Technologies Inc., a technology company in the area of transmissions for vehicles and equipment, has entered a memorandum of understanding (MOU) with TRW Automotive U.S. LLC, a subsidiary of TRW Automotive Holdings Corp.
2011-02-07
Article
BorgWarner has adapted its friction technologies developed for the automotive industry to the agricultural and construction market. Building on its European presence, BorgWarner entered the North American market a few years ago and has since launched a variety of new friction plates for John Deere and CNH America LLC with total volumes of nearly 2 million parts a year.
2011-02-01
Article
Force Control Industries' MagnaShear motor brake uses oil shear technology to lengthen service life in harsh applications.
2011-01-20
Article
Simrit’s E454 EPDM (ethylene-propylene rubber) compound is certified to NAS 1613 Revision 5 Specification, which establishes the requirements for elastomer seal elements used in hydraulic systems using phosphate ester fluids.
2011-01-20
Article
The world's largest steel producer recently unveiled a portfolio of weight-saving designs for front, side, and rear body panels as well as for the chassis, doors, and other hang-on parts to spur increased usage of advanced high-strength steels.
2011-01-19
Article
Trelleborg uses water injection technology for its hybrid brake pedal, cutting weight by between 30% and 50% compared to a conventional metal pedal.
2011-01-13
Article
TRW Automotive Holdings Corp. has secured several contracts for the supply of electric power steering (EPS) to domestic Chinese vehicle manufacturers, with the first launch scheduled as early as 2012.
2011-01-10
Article
R&D spending at TI Automotive continues on an upward trend as engineers work to develop technology solutions that meet emissions regulations.
2011-01-04
Article
Timken India Ltd., a subsidiary of The Timken Co., plans to invest Rs. 360 million, or approximately US$8 million, to expand tapered roller bearing manufacturing capacity in India to satisfy “a steep increase in demand…in and outside India,” said Ajay Das, Managing Director of Timken’s operations in India.
2011-01-04
Article
Techking's TKHardy alternative tire solution for mining trucks was designed to perform 85% in off-road conditions.
Viewing 241 to 270 of 412

Filter

  • Article
    412