Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 104
CURRENT
2017-02-09
Standard
J1883_201702
The bushing "TRAC" code is intended to be a tool that will aid in the definition of the geometric environment for the test, or use, of an elastomeric bushing.
CURRENT
2016-12-20
Standard
AIR6517
This User Guide describes the content of the Rhapsody version of the UCS Architectural Model and how to use this model within the Rhapsody modeling tool environment. The purpose of the Rhapsody version of the UCS Architectural Interface Control Document (ICD) model is to provide a model for Rhapsody users, derived from the Enterprise Architect (EA) model (AIR6515). The AIR6515 EA Model, and by derivation, the AIR6517 Rhapsody Model, have been validated to contain the same content as the AS6518 model for: - all UCS ICD interfaces - all UCS ICD messages - all UCS ICD data directly or indirectly referenced by ICD messages and interfaces - the Domain Participant, Information, Service and Non Functional Properties Models
CURRENT
2016-12-20
Standard
AIR6516
This User Guide describes the content of the Rational Software Architect (RSA) version of the UCS Architectural Model and how to use this model within the RSA modeling tool environment. The purpose of the RSA version of the UCS Architectural Interface ICD model is to provide a model for Rational Software Architect (RSA) users, derived from the Enterprise Architect (EA) ICD model (AIR6515). The AIR6515 EA Model, and by derivation, the AIR6516 RSA Model, have been validated to contain the same content as the AS6518 model for: - all UCS ICD interfaces - all UCS ICD messages - all UCS ICD data directly or indirectly referenced by ICD messages and interfaces - the Domain Participant, Information, Service and Non Functional Properties Models
CURRENT
2016-12-20
Standard
AIR6515
This User Guide describes the content of the Enterprise Architect (EA) version of the UCS Architectural Model and how to use this model within the EA modeling tool environment. The purpose of the EA version of the UCS Architectural Interface Control Document (ICD) model is to provide a working model for Enterprise Architect tool users and to serve as the source model for the Rational Software Architect (RSA) and Rhapsody models (AIR6516 and AIR6517). The AIR6515 EA Model has been validated to contain the same content as the AS6518 model for: - all UCS ICD interfaces - all UCS ICD messages - all UCS ICD data directly or indirectly referenced by ICD messages and interfaces - the Domain Participant, Information, Service, and Non Functional Properties Models
2016-10-25
WIP Standard
J826/1
This document describes the CAD model data available from SAE for the HPM-1 three-dimensional H-point machine. The elements of the CAD model include the outer surfaces of the cushion and back pans, datum points and lines, and calibration references. The intended purpose for this information is to provide a CAD reference for design and benchmarking as well as a calibration reference for the physical HPM-1 audits. The content and format of the data files that are available are also described. The actual CAD model files are included with this product and are provided in the following formats: CATIA v4 (without parametrics), CATIA v5 (without parametrics), IGES, and STEP.
CURRENT
2016-10-13
Standard
J826/2_201610
This document describes the 2-D computer-aided design (CAD) template for the HPM-1 H-point machine or HPD available from SAE. The elements of the HPD include the curve shapes, datum points and lines, and calibration references. The intended purpose for this information is to provide a master CAD reference for design and benchmarking. The content and format of the data files that are available are also described. The actual CAD model files are included with this product and are provided in the following formats: CATIA v5 (without parametrics), IGES, and STEP.
CURRENT
2016-06-16
Standard
EIAEDIF1
The increase in the number of silicon foundries and CAD/CAE system and workstation companies, and the problem of movement of data among in-house design systems has made a standard interchange format for electronic design data essential. The benefits of the general adoption of a standard interchange format are important and far reaching. The customer receives a much wider variety of feasible choices, and free competition in both CAEYCAD system/tool businesses and foundry businesses is enhanced. The electronic circuit designer and customer of CAE/CAD system and foundry service can expect compatibility among these products. The designer can choose equipment and services best suited for a particular task with a minimum of overhead. Foundries can work with customers regardless of the CAE/CAD equipment that the customer is using.
CURRENT
2016-06-16
Standard
EIAEDIFAG1
This document offers some conventions for the use of EDIF in transfer applications involving schematic designs. It discusses the use of EDIF 2 0 0 constructs that apply to the SCHEMATIC view. This document does not attempt to cover the use of EDIF for the transfer of all design aspects, It is intended to be a starting point for implementing EDIF schematic translators. It is not an EDIF user manual. It is not an amendment to the EDIF 2 O O Recommended Standard ANSIIEIA-548, which contains the official definition of the format and should always be taken as the authoritative source of EDIF information. This document assumes you are familiar with schematic capture systems but not familiar with EDIF. You will need to refer to EIA-548 for detailed definitions of some of the constructs discussed below.
CURRENT
2016-06-16
Standard
EIAEDIF2
This volume is the second in a series of monographs which will make the standard (ANSUEIA 548-1988) easier to understand. It is intended to be used as a companion to the EDIF Reference Manual Version 2.0.0, which is also published by the EL4 (ISBN 0-7908-0000-4). This volume gives an introduction to the concept of connectivity in the format. Concepts are explained in a general way; constructs, such as net, appear in italics throughout this volume. Whenever more detail is desired about a topic the italicized constructs should be consulted in the EDIF Reference Manual. The EDIF Reference Manual contains the official definition of the format and should always be taken as the authoritative source of information. Further application guides will be provided in later volumes of this series.
CURRENT
2016-06-16
Standard
EIAIS731_1
The purposeo f this Interim Standard is to support the development and improvement of systems engineering capability. The scope of this standard includesa ll activities that associate with or enable systems engineering. Systems engineering is an inter-disciplinary approach and means to enable the realization of successful systems. In this context, systems engineering is not limited to what either Systems Engineering organizations or Systems Engineers do. Rather it is the interaction of many people, processes, and organizations resulting in the accomplishment of the required activities.
CURRENT
2016-06-16
Standard
EIAIS731_2
This document describes the Appraisal Method (AM ) for the Systems Engineering Capability Model (SECM). An appraisal compares an organization's Systems Engineering capabilities against the Specific Practices of the Focus Areas and the Generic Characteristics defined in EIA/731, Part 1.
CURRENT
2016-06-15
Standard
EIAIS106
This standard will assist the vendors and users of CASE tools in developing mechanisms for interchanging information between CASE tools. This standard specifies an element of a family of related standards. When used together, these standards specify a mechanism for transfemng information between CASE tools. This standard, EIAIIS-IO6 CDIF - CASE Data Interchange Format - Overview, describes the architecture of the CDIF Family of Standards and provides an overview to all the current standards that form the CDIF Family of Standards.
CURRENT
2016-06-15
Standard
EIAIS107
This standard will assist the vendors and users of CASE tools in developing mechanisms for interchanging information between CASE tools. This standard specifies an element of a family of related standards. When used together, these standards specify a mechanism for transferring information between CASE tools.
CURRENT
2016-06-15
Standard
EIAIS108
This standard defines how CDIF supports multiple exchange Syntaxes and Encoding, and describes how CDIF meta-models are concretely represented during a transfer. EIAIZS-IO9 CDIF - Trartsfer- Format - Syntax SYNTAX.1 and EIAIIS-II0 CDIF - Transfer Format - Encoding ENCODING.1 define one specific CDIF Syntax and Encoding.
CURRENT
2016-06-15
Standard
EIAIS109
The CDIF Family of Standards is primarily designed to be used as a description of a mechanism for transferring information between CASE tools. It facilitates a successful transfer when the authors of the importing and exporting tools have nothing in common except an agreement to conform to CDIF. The language that is defined for the Transfer Format also has applicability as a general language for ImportExport from repositories. The CDIF Integrated Meta-model defined for CASE also has applicability as the basis of standard definitions for use in repositories.
CURRENT
2016-06-15
Standard
EIAIS110
This document is intended to be used by anyone wishing to understand and/or use CDIF. This dticument provides a definition of an encoding for CDIF transfers. -those evaluating CDIF -those who wish to understand the principles and concepts of a CDIF transfer -those developing importers and exporters.
CURRENT
2016-06-15
Standard
EIAIS111
This document is intended to be used by anyone wishing to understand and/or use CDIF. This document provides a definition of a single subject area of the CDIF integrated Meta-model. It is suitable for: -those evaluating CDIF -those who wish to understand the principles and concepts of a CDIF transfer -those developing importers and exporters.
CURRENT
2016-06-06
Standard
AS681K
This SAE Aerospace Standard (AS) provides the method for presentation of gas turbine engine steady-state and transient performance calculated using computer programs. It also provides for the presentation of parametric gas turbine data including performance, weight, and dimensions computed by computer programs. This standard is intended to facilitate calculations by the program user without unduly restricting the method of calculation used by the program supplier. This standard is applicable to, but not limited to the following program types: data reduction, steady-state, transient, preliminary design, study, specification, status, and parametric programs.
2016-01-26
WIP Standard
AS8002B
This SAE Aerospace Standard (AS) covers air data computer equipment (hereinafter designated the computer) which when connected to sources of aircraft electrical power, static pressure, total pressure, outside air temperature, and others specified by the manufacturer (singly or in combination) provides some or all of the following computed air data output signals (in analog and/or digital form) which may supply primary flight instruments: pressure altitude; pressure altitude, baro-corrected; vertical speed; calibrated airspeed; mach number; maximum allowable airspeed; overspeed warning; and total air temperature. In addition, the computer may supply one or more of the following signals: pressure altitude, digitized; equivalent airspeed; true airspeed; static air temperature; altitude hold; airspeed hold; mach hold; angle of attack; flight control gain scheduling; and others.
CURRENT
2015-07-01
Standard
EIAIS116
This document is intended to be used by anyone wishing to understand and/or use CDIF. This document provides a definition of a single subject area of the CDIF Integrated Meta-model. It is suitable for: - those evaluating CDIF - those who wish to understand the principles and concepts of a CDIF transfer - those developing importers and exporters.
CURRENT
2015-07-01
Standard
EIAIS115
This document is intended to be used by anyone wishing to understand and/or use CDIF. This document provides a definition of a single subject area of the CDIF Integrated Meta-model. It is suitable for: - those evaluating CDIF - those who wish to understand the principles and concepts of a CDIF transfer -those developing importers and exporters.
CURRENT
2015-07-01
Standard
EIAIS118
This document is intended to be used by anyone wishing to understand and/or use CDIF. This document provides a definition of a single subject area of the CDIF Integrated Meta-model. It is suitable for: -those evaluating CDIF -those who wish to understand the principles and concepts of a CDIF transfer -those developing importers and exporters.
CURRENT
2015-07-01
Standard
EIAIS103A
This document is the authoritative reference for the Library of Parameterized Modules (LPM) standard version 2 1 O. This specification defines the semantics of each module along with a complete description of the module's functionality as well as the syntaxfor instantiating LPM modules in an EDIF netlist. The intended audience for this document is CAE vendors, silicon vendors, and only secondarily, logic designers. It is assumed that the reader is familiar with logic design, design automation tools and silicon implementation options. What the reader should get out of this document is an understanding of the benefits of the LPM standard as well as the details required to implement an LPM interface.
CURRENT
2015-07-01
Standard
EIAIS112
This document is intended to be used by anyone wishing to understand and/or use CDIF. This document provides a definition of a single subject area of the CDIF Integrated Meta-model. It is suitable for: - those evaluating CDIF - those who wish to understand the principles and concepts of a CDIF transfer - those developing importers and exporters.
CURRENT
2015-07-01
Standard
EIAIS114
This document is intended to be used by anyone wishing to understand andor use CDIF. This document provides a definition of a single subject area of the CDIF Integrated Meta-model. It is suitable for: - those evaluating CDIF - those who wish to understand the principles and concepts of a CDIF transfer - those developing importers and exporters.
CURRENT
2015-07-01
Standard
EIA548
Scope is unavailable.
2015-06-16
WIP Standard
J3103
The test procedure included in this document are used to determine a benchmark SgRP for Class A vehicles where design intent information is unknown.
2015-05-05
WIP Standard
J3099
Presents the seating accommodation model used to determine seat track length for accommodation in design.
2014-10-16
WIP Standard
J826/3
This document describes the CAD model data of legs and back hardware available from SAE for the HPM-1 three-dimensional H-point machine. The elements of the CAD model include the feet, lower and thighs as well as headroom probe and t-bar. Also included are datum points and lines, and calibration references. The intended purpose for this information is to provide a CAD reference for design and benchmarking as well as a calibration reference for the physical HPM-1 audits. The content and format of the data files that are available are also described. The actual CAD model files are included with this product and are provided in the following formats: CATIA v4 (without parametrics), CATIA v5 (without parametrics), IGES, and STEP.
CURRENT
2014-08-19
Standard
J2221_201408
This SAE Recommended Practice identifies graphic symbols used in electrical circuit diagrams. The symbols aid troubleshooting electrical systems.
Viewing 1 to 30 of 104

Filter

  • Standard
    104