Criteria

Text:
Content:
Display:

Results

Viewing 271 to 300 of 517
2011-08-18
Article
PPG’s Opticor advanced transparency material is the first new transparent plastic developed in more than 50 years for aerospace applications, according to Anthony Stone, Global Director for New Business Development and Innovations for Transparencies.
2011-08-15
Article
Advanced measurement platforms are leading a growing trend in synchronization that reduces cabling, adds absolute time referencing, and optimizes data correlation for large systems.
2011-08-10
Article
Advanced solar-control glass can alleviate the A/C system’s workload and is about 10% lighter than similar-thickness tempered glass—both of which can contribute to better fuel economy/freight efficiency as well as increased range in electrified vehicles.
2011-07-12
Article
Hutchens Industries' Hutch 9800 series of heavy-duty trailer slider systems can fit requirements for a standard 49-in (1245-mm) tandem axle or a widespread axle application.
2011-07-07
Article
Helsinki, Finland-based Rautaruukki (Ruukki) will supply its wear-resistant special steel Raex 400 to Caterpillar for use in the main body structure of the company’s articulated dump trucks (ADTs), considered to be one of the most demanding applications for wear-resistant steel due to the continual impact and wear experienced.
2011-06-29
Article
Aleris has signed a five-year contract to provide aluminum plate and sheet in a range of alloys to Airbus for its global programs. The agreement covers supply for the years 2012 through 2016. The agreement also includes the development of a recycling program, where Aleris will recycle scrap for Airbus.
2011-06-21
Article
Limestone powder "cloud" collects paint overspray, turning it into an ingredient in concrete, a first-ever application for the system.
2011-06-19
Article
Despite huge advances in primary and secondary visibility, there continues to be constraints on further improvement caused by the often conflicting requirements of vehicle design and structural integrity, including the thickness of the A-pillar—a vital aspect of crashworthiness. But now, Autoliv has come up with a potential solution: an expandable pillar.
2011-05-18
Article
The E-Series Inertial Stabilization Module (ISM) pan/tilt model from FLIR Motion Control Systems is an open-architecture inertial stabilization option on pan/tilts that improves performance.
2011-05-16
Article
Exechon AB says its platformless PKM delivers high dynamics and accuracy while dramatically reducing cost.
2011-05-05
Article
As part of an "aggressive growth strategy," and to take advantage of southeastern Michigan's highly "skilled" technical talent pool, lighting supplier Grakon has opened an engineering and design center in Northville, MI.
2011-04-25
Article
Two Hella employees with engineering degrees and backgrounds have moved up the corporate ladder. Mark Brainard has been promoted from Vice President of Program Management at Hella Electronics to Vice President of Sales at Hella's Corporate Center in Plymouth, MI.
2011-04-19
Article
LED ground lighting from LEDtronics improves safety, efficiency, and reduces maintenance costs for rail locomotives, according to the company.
2011-04-18
Article
Full LED lighting for automotive headlamps expected to expand by 2016, Hella says at SAE Congress-related event.
2011-04-18
Article
Osram Opto Semiconductors’ OSTAR headlamp LED uses the auto industry’s first ThinGaN light-emitting diodes (LEDs) with phosphor layer transfer, according to the company.
2011-04-18
Article
Goodrich Corp. signed an agreement with SSCP Aero Holdings S.C.A. to acquire Microtecnica S.r.l., a leading provider of flight control actuation systems for helicopter, regional and business aircraft, missile actuation, and aircraft thermal and environmental control systems.
2011-04-14
Article
The company's new implementation of Dassault Systèmes’ DELMIA Robotics solution has made the company’s manufacturing processes more efficient by leveraging a common interface across its CATIA design authoring and DELMIA digital manufacturing solutions.
2011-04-13
Article
The Vice President of Technology for Inalfa Roof Systems USA, Glen Holtz, chats with AEI at the SAE 2011 World Congress about the potential of solar-panel roof modules as a source for renewable electrical power used to run vehicle accessories and to recharge electrical-propulsion energy storage systems.
2011-04-12
Article
Allegro MicroSystems’ A1152/3/5/6 line of two-wire, unipolar, Hall-effect switches complements its existing family of devices used in seatbelt buckle, seat position, and steering lock applications.
2011-03-30
Article
"The future will be less about increasing power, more about reducing weight,” said Stephan Winkelmann, President and CEO of Automobil Lamborghini, as he revealed the manufacturing secrets of the company’s new Aventador LP 700-4.
2011-03-25
Article
A new high-tech weave gives the convertible top on the 2012 BMW 6 Series cabriolet a stylized look. The tightly controlled elongation and recovery properties of the Haartz topping material ensure that sound is not transmitted through the soft top into the vehicle cabin due to turbulent wind buffeting.
2011-03-16
Article
The Insurance Institute for Highway Safety (IIHS) has released dramatic video of recent testing to underscore its call for the U.S. government to beef up standards on rear underguards on tractor-trailers.
2011-03-14
Article
Carpenter Technology’s Temper Tough ultrahigh-strength steel (UHSS) is an air-melted, cobalt-free quench and tempered alloy.
2011-03-14
Article
Cosma International engineers have produced a bimetallic engine cradle that meets General Motors' design and performance requirements.
2011-03-11
Article
The U.S. Department of Transportation's NHTSA (National Highway Traffic Safety Administration) unit has decided not to pursue a rule that would require automatic reversal systems (ARS) for power windows, and it has re-opened the comment period for its proposal to require an expanded field of view for all vehicles weighing 10,000 lb or less.
2011-03-11
Article
Automobiles traditionally have been assembled using either unitized or body-on-frame construction. Uni-Chassis from Theodore & Associates provides an alternative by connecting stressed front and rear powertrain/suspension structures to a rigid backbone, eliminating the frame. The proof-of-concept chassis will be displayed for the first time at the SAE 2011 World Congress in Detroit.
2011-03-08
Article
SignalSure from Philips Lumileds is a mid-power LED for automotive signaling applications.
2011-03-08
Article
The small MAV unveiled at the Geneva Motor Show features sliding rear doors and no B-pillar, and it's powered by what will be the latest addition to the Ford small engine range.
2011-03-07
Article
Evaluation prototypes and design specifications for Wheelpump's Loewe on-wheel pump are available to automobile manufacturers and component OEMs.
2011-02-28
Article
CINOS features a spot lighting system developed by the company’s own optical design team for interior and exterior applications.
Viewing 271 to 300 of 517

Filter

  • Article
    517