Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 1 to 30 of 2754
CURRENT
2018-01-10
Standard
J1434_201801
This report approaches the material selection process from the designer's viewpoint. Information is presented in a format designed to guide the user through a series of decision-making steps. "Applications criteria" along with engineering and manufacturing data are emphasized to enable the merits of aluminum for specific applications to be evaluated and the appropriate alloys and tempers to be chosen.
CURRENT
2018-01-09
Standard
J993_201801
This standard provides systems for designating wrought aluminum and wrought aluminum alloys, aluminum and aluminum alloys in the form of castings and foundry ingot, and the tempers in which aluminum and aluminum alloy wrought products and aluminum alloy castings are produced.
CURRENT
2018-01-09
Standard
J454_201801
The SAE Standards for wrought aluminum alloys cover materials with a considerable range of properties and other characteristics, but do not include all of the commercially available materials. If none of the materials listed in Tables 1 through 7 provides the characteristics required by a particular application, users may find it helpful to consult with the suppliers of aluminum alloy products. See companion document, SAE J1434.
2018-01-04
WIP Standard
AMS4372
1.1 Form This specification covers an aluminum-lithium alloy in the form of plate with a product thickness range of 0.500" to 6.500". 1.2 Application This plate has been used typically for parts where low density is needed in combination with a high level of mechanical properties and very good resistance to stress-corrosion cracking, but usage is not limited to such applications. Material is delivered in T34 temper and solution heat treated to obtain T82 temper by the end user.
CURRENT
2017-12-12
Standard
AMS3050/7
The foundation specification (AMS3050) and this category specification (AMS3050/7) cover anti-seize greases conforming to the requirements, but using the anti-seize ingredient Copper+Graphite+Aluminum only.
CURRENT
2017-12-12
Standard
AMS3050/2
The foundation specification (AMS3050) and this category specification (AMS3050/2) cover anti-seize greases conforming to the requirements, but using the anti-seize ingredient Aluminum only.
CURRENT
2017-12-12
Standard
AMS3050/8
The foundation specification (AMS3050) and this category specification (AMS3050/8) cover anti-seize greases conforming to the requirements but using the anti-seize ingredient Graphite+Aluminum only.
2017-12-03
WIP Standard
AMSQQA200/5B
This specification covers the specific requirements for aluminum alloy 5086 bar, rod, shapes, tube, and wire produced by extrusion.
2017-11-30
WIP Standard
AMS03_18A
This SAE Standard specifies the properties of chromate conversion coatings on aluminum and aluminum alloys. It details inspection and testing requirements for chromate conversion coatings. Where there are differences in the requirements for the Brushing Grade from the Standard Grade they are highlighted in this Standard.
2017-11-17
WIP Standard
AMSWWT700/3B
This specification covers the specific requirements for seamless tube drawn from aluminum alloy 2024.
2017-11-16
WIP Standard
AMS7721D
This specification covers a lead alloy in the form of sheet and extrusions.
CURRENT
2017-11-03
Standard
AMS2420E
This specification covers the requirements for preparation of aluminum and aluminum alloys for soldering by zinc immersion pre-treatment followed by copper plating and tin or tin-zinc alloy plating.
2017-10-28
WIP Standard
AMS4407A
This specification covers an aluminum alloy in the form of plate.
2017-10-28
WIP Standard
AMS4405B
This specification covers an aluminum alloy procured in the form of sheet Alclad on both sides.
2017-10-28
WIP Standard
AMS4456A
This specification covers an aluminum alloy in the form of hand forgings 11 inches (280 mm) and under in nominal thickness, and of forging stock.
2017-10-28
WIP Standard
AMS4482A
This specification covers a dilute aluminum/TiB2 metal matrix composite in the form of sand castings.
2017-10-28
WIP Standard
AMS4276B
This specification covers an aluminum alloy in the form of sheet with fine grain structure.

This sheet has been used typically for severely-formed structural parts which will be subsequently heat treated and painted or otherwise protected from corrosion, but usage is not limited to such applications.

2017-10-28
WIP Standard
AMS4345C
This specification covers an aluminum alloy in the form of extruded bars, rods, profiles, and tubing.
2017-10-28
WIP Standard
AMS7731D
This specification covers pure gold in the form of wire and ribbon.
2017-10-28
WIP Standard
AMSQQA367E
This specification covers aluminum alloy die forgings and hand forgings.
2017-10-28
WIP Standard
AMSA22771D
The initial SAE publication of this document was taken directly from U.S. Military Standard MIL-A-22771D. This SAE Standard may retain the same part numbers established by the original military document. Any requirements associated with Qualified Products Lists (QPL) may continue to be mandatory for DoD contracts. Requirements relating to QPLs have not been adopted by the SAE for this standard and are not part of this SAE document.
2017-10-28
WIP Standard
AMS4402A
This specification covers an aluminum alloy in the form of extruded profiles (shapes) 0.063 to 0.375 inch (1.6 to 10 mm), inclusive, in nominal thickness (see 8.6).
2017-10-28
WIP Standard
AMS4342F
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles 5.000 inches (127.00 mm) and under in nominal diameter or thickness and 32 in2 (206 cm2) and under in cross-sectional area, and tubing 3.000 inches (76.20 mm) and under in wall thickness and 20 in2 (129 cm2) and under in cross-sectional area (see 8.5).
CURRENT
2017-10-04
Standard
AMS03_25A
This SAE Standard specifies the properties of sulphuric acid anodizing of aluminum and aluminum alloys.
CURRENT
2017-10-04
Standard
AMS03_28PT1A
This SAE Standard covers the requirements for coatings of high purity aluminum on low alloy steels, high strength steels, corrosion-resisting steels, aluminum alloys and titanium alloys and other materials where appropriate.
2017-09-27
WIP Standard
AMS4143F
This specification covers an aluminum alloy in the form of die forgings, hand forgings, forged rings, rolled rings, and stock for forging or rings.
2017-09-27
WIP Standard
AMS4186E
This specification covers an aluminum alloy in the form of bars, rods, and wire in the “as fabricated (F) temper. When specified, product shall be supplied in the annealed (O) condition.
2017-09-27
WIP Standard
AMS4217J
This specification covers an aluminum alloy in the form of castings.
Viewing 1 to 30 of 2754

Filter

  • Standard
    2754