Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 1 to 30 of 48
CURRENT
2017-09-11
Standard
ARP1621C
This SAE Aerospace Recommended Practice (ARP) defines minimum requirements for an aircraft transport ULD to transport horses properly and safely by air, to protect the horse(s) from injuries, and to protect the aircraft from corrosion created by waste spill. The ULD is designed to accommodate one horse or several.
CURRENT
2017-08-15
Standard
AS5714A
This SAE Aerospace Standard (AS) prescribes the Minimum Performance Standards (MPS) for wheel, brake, and wheel and brake assemblies to be used on aircraft certificated under 14 CFR Parts 23, 27, and 29. Compliance with this specification is not considered approval for installation on any aircraft.
2017-08-10
WIP Standard
ARP5151A
This document describes a process that may be used to perform the ongoing safety assessment for (1) GAR aircraft and components (hereafter, aircraft), and (2) commercial operators of GAR aircraft. The process described herein is intended to support an overall safety management program. It is to help a company establish and meet its own internal standards. The process described herein identifies a systematic means, but not the only means, to assess continuing airworthiness. Ongoing safety management is an activity dedicated to assuring that risk is identified and properly eliminated or controlled. The safety management process includes both safety assessment and economic decision-making. While economic decision-making (factors related to scheduling, parts, and cost) is an integral part of the safety management process, this document addresses only the Ongoing Safety Assessment Process.
2017-06-01
WIP Standard
AIR4250C
This report lists documents that aid and govern the design, development, and utilization of aerospace electronic engine control systems. The report lists the military and industry specifications and standards that are commonly used in electronic engine control system design. However, this list is not necessarily complete. The specifications and standards section has been divided into two parts; a master list arranged numerically and a categorized list that provides a functional breakdown and cross reference of these documents. For specifications and standards, the issue available during the latest revision to this document is listed. Details of current revisions for many documents are available in the Department of Defense Index of Specifications and Standards (DODISS).
CURRENT
2017-05-08
Standard
AS5385D
1.1 This SAE Aerospace Standard (AS) aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22250 N (5000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain cargo on board civil transport aircraft during flight:
CURRENT
2017-03-14
Standard
AS36102B
This SAE Aerospace Standard (AS) specifies the testing methods to be used to substantiate performance of air cargo containers, pallets and nets (Unit Load Devices) for airworthiness approval in accordance with NAS 3610 or AS36100.
CURRENT
2017-02-15
Standard
AS6554A
The purpose of this SAE Aerospace Standard (AS) is to standardize the basic design, performance, and testing requirements for “Cargo Stoppers” cargo tie-down accessories to be used in conjunction with approved restraint straps meeting AS5385C (TSO C-172) requirements.
2017-01-18
WIP Standard
AIR6190A
This document provides information on provisions for passengers with disabilities on board commercial aircraft. In this context the term "provision of medical oxygen" shall be understood as application of oxygen on board an aircraft not linked to (post) decompression in the sense of Airworthiness Requirements FAR/CS 25 and Operational Regulations of FAR 121/135. Information about available equipment and physiological treatment in clinical practice will be provided in this document. It covers the use of oxygen concentrators according to guidance of FAR Advisory Circular AC120-95.
CURRENT
2016-10-16
Standard
ARP5757A
This SAE Aerospace Recommended Practice (ARP) provides guidance for substantiating the airworthiness of aircraft engine components. Generally these components are associated with the engine control system, the system or systems that allow the engine to provide thrust or power as demanded by the pilot of the aircraft while also ensuring the engine operates within acceptable operating limits. But these components may also include hardware and systems associated with engine lubrication, engine or aircraft hydraulic or electrical systems, aircraft environmental control systems, thrust reverser control, or similar aircraft or engine propulsion system functions. This paper develops the concept of using a 26 item matrix of environmental conditions for evaluating aircraft engine component airworthiness. This approach is compatible with current practices used in the industry and has been accepted by engine certification authorities as part of engine certification programs.
CURRENT
2016-03-05
Standard
ARP5120
ARP5120 provides recommended best practices, procedures, and technology to guide the physical and functional design, development, integration, verification, and validation of highly reliable Engine Health Management (EHM) systems for aircraft engines and Auxiliary Power Units (APUs). This SAE Aerospace Recommended Practice (ARP) also serves as a concise reference of considerations, approaches, activities, and requirements for producing the end-to-end engine health management system comprised of both on and off-board subsystems for the sensing, acquisition, analysis, detection, and data handling functions for EHM. These functions may also be used to effect continued operation or return to service decisions when demonstrated as compliant with the applicable airworthiness requirements defined by the responsible Aviation Authority. Where practical, this document delineates between military and commercial practices.
CURRENT
2014-10-09
Standard
ARP4925B
This SAE Aerospace Recommended Practice (ARP) establishes the factors which should be considered in the design and installation of a commercial transport rotorcraft hydraulic system, including the applicable airworthiness regulations that affect the hydraulic system. This ARP also provides information and guidelines on the many factors that arise in the design process to provide cost effectiveness, reliability, maintainability and accepted design and installation practices.
CURRENT
2014-10-08
Standard
ARP6200
This SAE Aerospace Recommended Practice (ARP) describes the recommended tests and their associated test means for commercial aircraft hydraulic systems at the system level that are required to demonstrate compliance with the 14 CFR Part 25 and EASA CS 25 airworthiness regulations, and to show that the required level of maturity at the aircraft entry into service (EIS) has been achieved.
CURRENT
2014-01-03
Standard
AS5896
This SAE Aerospace Standard (AS) covers the design, fabrication, performance, and testing requirements for general-purpose, base-restrained, containers requiring airworthiness approval for installation/use in aircraft lower deck compartments. See 10.1 and 10.2.
CURRENT
2013-12-02
Standard
ARP4752B
This SAE Aerospace Recommended Practice (ARP) provides guidance for the design and installation of a commercial aircraft hydraulic system to meet the applicable requirements, including the applicable airworthiness regulations that affect the hydraulic system design. This ARP also provides information and guidelines on the many factors that arise in the design process to provide cost effectiveness, reliability, maintainability and accepted design and installation practices.
CURRENT
2013-08-06
Standard
AS6453
This SAE Aerospace Standard (AS), identical to ISO 14186, specifies the minimum design and performance criteria and testing methods of fire containment covers (FCCs) used either: in those cargo compartments of civil transport aircraft where they constitute one means of complying with applicable airworthiness regulations, or on a voluntary basis, when deemed appropriate by operators to improve fire protection in aircraft cargo compartments where airworthiness regulations do not mandate their use.
CURRENT
2013-06-27
Standard
AS1677D
This SAE Aerospace Standard (AS) covers the design, fabrication, performance and operational testing requirements for lower deck containers for use in main line aircraft which do not require airworthiness certification when loaded under the conditions of compartment restraint and in accordance with the aircraft's Weight and Balance Manual and/or, where applicable according to the aircraft type's approved Weight and Balance Manual, AS36100A or NAS 3610 equivalent base plate restraint for these containers. Most sizes of containers covered by this document (base sizes K, L, P, and Q) cannot physically be loaded and latched on aircraft main deck cargo systems. Base size A and M containers can, but are not allowed on aircraft main decks, which do not accept non-certified units. Accordingly, all containers covered by this document are to be used/installed exclusively in aircraft lower deck compartments.
CURRENT
2012-11-21
Standard
ARP36103A
This SAE Aerospace Recommended Practice (ARP) provides the industry agreed methods to keep the center of gravity (C.G.) location of loaded air cargo Unit Load Devices (ULDs) within the maximum horizontal and vertical limits allowed by their airworthiness approval.
CURRENT
2012-08-22
Standard
ARP5911A
The present Aerospace Recommended Practice specifies for airplane operator and tow vehicle manufacturers the basic testing requirements for towbarless tow vehicles to be used on the nose gear of conventional tricycle type landing gears of commercial civil transport aircraft with maximum ramp weight between 8600 kg (19 000 lb) and 50 000 kg (110 000 lb), commonly designated as “regional aircraft”. Its purpose is to achieve testing results, or equivalent computer modeling, demonstrating that the loads induced by the tow vehicle will not exceed the design loads of the airplane’s nose landing gear and associated structure, reduce the certified safe life limit of the nose landing gear, or otherwise compromise the airplane’s structural integrity and airworthiness certification.
CURRENT
2012-06-06
Standard
AIR6190
This document provides information on provisions for passengers with disabilities on board commercial aircraft. In this context the term "provision of medical oxygen" shall be understood as application of oxygen on board an aircraft not linked to (post) decompression in the sense of Airworthiness Requirements FAR/CS 25 and Operational Regulations of FAR 121/135. Information about available equipment and physiological treatment in clinical practice will be provided in this document. It covers the use of oxygen concentrators according to guidance of FAR Advisory Circular AC120-95.
CURRENT
2012-01-18
Standard
AIR4250B
This report lists documents that aid and govern the design, development, certification and utilization of aerospace electronic engine control systems. The report lists the military and industry specifications and standards that are commonly used in electronic engine control system design. Also included are Airworthiness Authority documents and requirements associated with certification. However, these lists are not necessarily complete. The specifications and standards section has been divided into two parts; a master list arranged numerically and a categorized list that provides a functional breakdown and cross-reference of these documents. For specifications and standards, the issue available during the latest revision to this document is listed. Details of current revisions for many documents are available in the Department of Defense Index of Specifications and Standards (DODISS).
CURRENT
2011-11-23
Standard
AIR36107A
This SAE Aerospace Information Report (AIR) provides a record of the development by SAE AGE-2A Air Cargo Sub-Committee of Aerospace Standard AS36100, Air Cargo Unit Load Devices - Performance Requirements and Test Parameters, published 2005-02, intended as a technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded with either baggage or freight on board civil transport aircraft, and to partly supersede previously used NAS 3610, Cargo unit load devices - Specification for - [Revision 10, 1990, referenced in TSO C90c].
CURRENT
2011-11-21
Standard
ARP6402A
This document includes recommendations of installations of adequate landing and taxiing lighting systems in aircraft of the following categories: Single engine personal and/or liaison type Light twin engine Large multiengine propeller Large multiengine turbojet Military high performance fighter and attack Helicopter which are subject to the following CFR Parts certification: Part 23 – Airworthiness Standards: Normal, Utility, Acrobatic and Commuter Aircrafts Part 25 – Airworthiness Standards: Transport Category Aircrafts Part 27 – Airworthiness Standards: Normal Category Rotorcraft Part 29 – Airworthiness Standards: Transport Category Rotorcraft
CURRENT
2011-11-04
Standard
ARP5595A
This Aerospace Recommended Practice aims at providing general utilization guidelines and calculation methods adequate to guarantee the effectiveness and ultimate load strength of tie-down / lashing arrangements performed to restrain cargo on board civil transport aircraft during flight: cargo loaded and tied down onto airworthiness approved air cargo pallets, themselves restrained into aircraft lower deck, main deck or upper deck cargo systems meeting the restraint requirements of air cargo pallets approved in accordance with NAS3610 or AS36100A, or additional tie-down on aircraft structure when necessitated by pallet maximum gross mass or CG, or individual pieces of cargo, or pieces of cargo placed onto an unrestrained (“floating”) pallet into either lower deck, main deck or upper deck containerized cargo compartments of an aircraft, or individual pieces of load loaded in non containerized (bulk loaded) baggage or cargo compartments.
CURRENT
2011-08-11
Standard
AIR5060A
The purpose of this document is to provide reference material for establishing compatibility of electronic gas turbine engine control systems and associated components with the electromagnetic environment and achieving compliance with associated airworthiness requirements.
CURRENT
2010-12-21
Standard
ARP4754A
This document discusses the development of aircraft systems taking into account the overall aircraft operating environment and functions. This includes validation of requirements and verification of the design implementation for certification and product assurance. It provides practices for showing compliance with the regulations and serves to assist a company in developing and meeting its own internal standards by considering the guidelines herein. The guidelines in this document were developed in the context of Title 14 Code of Federal Regulations (14CFR) Part 25 and European Aviation Safety Agency (EASA) Certification Specification (CS) CS-25. It may be applicable to other regulations, such as Parts 23, 27, 29, 33, and 35 (CS-23, CS-27, CS-29, CS-E, CS-P). This document addresses the development cycle for aircraft and systems that implement aircraft functions.
CURRENT
2010-06-04
Standard
ARP5583A
This guide provides detailed information, guidance, and methods related to the Federal Aviation Administration (FAA) Advisory Circular (AC) 20-158 and European Aviation Safety Agency (EASA) draft Advisory Material Joint (AMJ), both titled "The Certification of Aircraft Electrical and Electronic Systems for Operation in the High-Intensity Radiated Fields (HIRF) Environment". The AC provides acceptable means, but not the only means, of compliance with Title 14, Code of Federal Regulations (14 CFR) 23.1308, 25.1317, 27.1317, and 29.1317, High-Intensity Radiated Fields (HIRF) protection for Aircraft Electrical and Electronic Systems, and applicable FAA HIRF Special Conditions to prevent hazards to aircraft electrical and electronic systems due to HIRF produced by external transmitters. It is also intended for this guide to provide the same information, guidance, and methods to the European Aviation Safety Agency (EASA) interim HIRF policies certification requirements.
CURRENT
2010-05-11
Standard
AIR5005A
This SAE Aerospace Information Report (AIR) has been compiled to provide information on hydraulic systems fitted to commercial aircraft. Data has been provided for following aircraft types: Wide body jet airliners Narrow body jet airliners Turboprop/commuter aircraft Business jet aircraft The airliners that have been included in this document are generally in operational service with either airlines or cargo operators. Information on aircraft that have been retired from in-service use has been included for reference purposes. No information is presented for aircraft that are currently being developed.
CURRENT
2008-08-13
Standard
AIR36106A
This SAE Aerospace Information Report (AIR) provides instructions for intended proper use of Aerospace Standard AS36100A, published 2006-04 [TSO pending], as the technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded on board civil transport aircraft. For consistency and cross-checking purposes, it also includes instructions for proper use of previous NAS 3610 [Revision 10, 1990, referenced in TSO C90c], as commonly understood by the industry.
CURRENT
2008-07-05
Standard
AIR36108
This Aerospace Information Report (AIR) provides a record of the development by SAE AGE-2A Air Cargo Sub-Committee of Aerospace Standard AS36100, Air Cargo Unit Load Devices — Performance Requirements and Test Parameters, published 2005-02, and its revision A published 2006-04, intended as a technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded with either baggage or freight on board civil transport aircraft, and to partly supersede previously used NAS 3610, Cargo unit load devices - Specification for — [ Revision 10, 1990, referenced in TSO C90(c) ].
HISTORICAL
2008-03-17
Standard
ARP5757
This SAE Aerospace Recommended Practice (ARP) provides guidance for substantiating the airworthiness of aircraft engine components. Generally these components are associated with the engine control system, the system or systems that allow the engine to provide thrust or power as demanded by the pilot of the aircraft while also ensuring the engine operates within acceptable operating limits. But these components may also include hardware and systems associated with engine lubrication, engine or aircraft hydraulic or electrical systems, aircraft environmental control systems, thrust reverser control, or similar aircraft or engine propulsion system functions. This paper develops the concept of using a 26 item matrix of environmental conditions for evaluating aircraft engine component airworthiness. This approach is compatible with current practices used in the industry and has been accepted by engine certification authorities as part of engine certification programs.
Viewing 1 to 30 of 48

Filter

  • Standard
    48