Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 579
CURRENT
2017-11-16
Standard
AMS3284C
This specification covers a polysulfide sealing compound with low adhesive strength. This elastomeric compound shall be supplied as a two-component system which cures at room temperature.
2017-10-14
WIP Standard
AMS3374E
This specification covers six (6) types of sealing compounds curing to elastomeric materials.
2017-10-14
WIP Standard
AS5127C
This standard describes the accepted methods used for preparing aerospace sealant test specimens for qualification and quality conformance or acceptance testing. AS5127/1 and AS5127/2 are to be used in conjunction with this document and the applicable AMS specifications.
CURRENT
2017-09-20
Standard
ARP1575C
This document describes a hand-applied, nontank, phosphoric acid anodizing process for surface preparation of aluminum alloys required to achieve optimum bondline durability for structural adhesive bonding.
CURRENT
2017-07-17
Standard
AMS3255B
This specification establishes the requirements for an expanded polytetrafluoroethylene (EPTFE) in the form of sealing tape, gaskets, or sheets requiring no mixing or curing.
CURRENT
2017-07-13
Standard
AMS3681E
This specification covers an electrically-conductive adhesive supplied as two components, a silver-filled, epoxy-base adhesive and a separate curing agent which may be paste or liquid.
CURRENT
2017-06-19
Standard
AS7200/1B
This document has been declared "CANCELLED" as of June 2017 and has been superseded by PRI AC7200/1. By this action, this document will remain listed in the Numerical Section of the Aerospace Standards Index noting that it is superseded by PRI AC7200/1. Cancelled specifications are available from SAE.
CURRENT
2017-06-16
Standard
J1525_201706
This SAE Recommended Practice describes a lap shear test method for use in measuring the bonding characteristics of automotive-type adhesives for joining fiber reinforced plastics (FRPs) to themselves and to metals.
2017-04-07
WIP Standard
AMS3277K
This specification covers polythioether rubber fuel resistant sealing compounds supplied as a two-component system which cures at room temperature.
2017-03-16
WIP Standard
AMS1320B
This specification covers a solvent-type remover in the form of a liquid. Primarily for removing decal adhesive residue from painted surfaces, metal, plastics, and interior decor of aircraft.
CURRENT
2017-02-23
Standard
AMS3266A
This specification covers two types of electrically conductive, elastomeric polythioether sealing compounds that cure at room temperature. The sealing compound is supplied as either a two-component system or as premixed and frozen.
CURRENT
2017-02-22
Standard
AMS3102
This specification covers a fuel-resistant polythioether sealing compound with low specific gravity, supplied as a two-component system which cures at room temperature.
CURRENT
2017-02-08
Standard
AMS2629E
This specification covers a mixture of liquid hydrocarbons and soluble additives.
CURRENT
2016-11-23
Standard
AIR4069C
This SAE Aerospace Information Report (AIR) presents preferred design, assembly, and repair practices for sealing of aircraft integral fuel tanks, including rework of applied fuel tank seals. It addresses engineering designs for integral fuel tanks as they are currently found in practice; and discusses the most practical and conservative methods for producing a reliable, sealed system. Although this AIR presents practices for sealing of integral fuel tanks, the practices presented within this report are practices that are carried throughout sealing that include both pressure and environmental aircraft sealing. Design preferences for optimum sealing are not within the scope of this document. Such discussions can be found in the United States Air Force (USAF) sponsored report, entitled Aircraft Integral Fuel Tank Design Handbook, AFWAL-TR-87-3078.
CURRENT
2016-11-10
Standard
AMS3690D
This specification covers a two-component compound, an epoxy resin base and a hardener, in the form of a paste.
CURRENT
2016-11-10
Standard
AMS3687C
This specification covers a high-humidity-resistant, modified epoxy adhesive in the form of film supplied as rolls or sheets.
CURRENT
2016-11-10
Standard
AMS3693D
This specification covers a modified epoxy adhesive in the form of supported film supplied in rolls or sheets.
CURRENT
2016-11-10
Standard
AMS3698C
This specification covers one type of hot-melt, addition-type, polyimide adhesive in the form of supported film furnished in rolls or cut sheets.
CURRENT
2016-10-25
Standard
AMS3276G
This specification covers fuel-resistant polysulfide (T) sealing compounds supplied as a two-component system.
CURRENT
2016-10-24
Standard
AMS3278B
This specification covers polyurethane (PUR) in the form of two-component sealing compounds.
HISTORICAL
2016-08-24
Standard
AMS3681D
This specification covers an electrically-conductive adhesive supplied as two components, a silver-filled, epoxy-base adhesive and a separate curing agent which may be paste or liquid.
CURRENT
2016-08-16
Standard
J1615_201608
Male pipe threads, including male dryseal pipe threads, when made into assemblies or installed into ports, will generally leak if not covered with a sealant. This SAE Recommended Practice is intended as a guide to assist designers and/or users in the selection and application of various types of thread sealants. The designers and users must make a systematic review of each type and application and then select the sealant to fulfill the requirements of the application. The following are general guidelines and are not necessarily a complete list.
CURRENT
2016-07-12
Standard
AMS3807C
This specification covers aluminum foil tape with a pressure sensitive adhesive.
CURRENT
2016-07-12
Standard
AMS3779B
This specification and its supplementary detail specifications cover thermal radiation resistant materials in the form of tape with pressure-sensitive adhesive.
CURRENT
2016-07-12
Standard
AMS3779/2B
This specification covers thermal radiation resistant material in the form of tape with pressure-sensitive adhesive.
CURRENT
2016-07-12
Standard
AMS3779/1B
This specification covers thermal radiation resistant material in the form of tape with pressure-sensitive adhesive.
CURRENT
2016-07-12
Standard
AMSS83318C
This specification covers two-component polysulfide sealing compounds for quick repair of integral fuel tanks and fuel cell cavities. The sealing compound shall be capable of being cured as low as 20 °F (-7 °C), and be resistant to long term exposures from -65 to 250 °F (-54 to 121 °C).
CURRENT
2016-07-06
Standard
AMST6841A
This specification covers one type of tape and sheet for use in the installation of windshields, panels, and windows in cabins and cockpits of aircraft.
CURRENT
2016-06-29
Standard
AMSA8576A
This specification covers acrylic-monomer base adhesives intended for use in bonding acrylic plastics.
Viewing 1 to 30 of 579

Filter

  • Standard
    579